Fixcracked Touch Screen Replacement Parts Digitizer Glass Assembly for Ipad mini 2012 （A1432 A1454 A1455）& mini 2 2013 (A1489 A1490 A1491) 9.7 inch+ Professional Tool Kit (white)

I was able to put it on myself. Before I ordered it half of my touch screen wasn’t working. So I ordered this and put it together in about an hour or less. The only complaint I have is the adhesive. The adhesive to put the digitizer back on didn’t stick on as well as I thought it would. I can see some very small gaps but other then that the screen works now. For 20 bucks? I can’t really complain

I fix things. If you dont, its best to leave this alone and send it to a repair shop. I bought 2 of these, the first to fix my wifes ipad mini 2, the second to fix my daughters. It worked, but took me a full day for each. One thing that is not apparent is the plastic film you need to remove from the gasket in order to seal the new digitizer. Its very difficult to see, but its there and you need to remove it. It would be nice if this company had a youtube video of their own to help you, but you have to rely on other suppliers videos to get the job done. No instructions included and the instructions provided in the ad are minimal. But it works.

Touch screen not working

The instructions say you may use a hair dryer but it doesn’t get hot enough to soften the adhesive. So if you can use a heat gun, do so. My screen was totally smash so the suction cup didn’t help much. For that to work it needs a preferably uncracked part of the screen. Otherwise, use the nice selection of tools provided Ed to dig it out. All in all you have to have a half a brain to complete this repair. I wore latex gloves to protect from shards of glass. Also use containers such as an egg carton when you remove the screws and label where they go. The only disappointment which is one of the most important things is the adhesive. After you transfer the magnets and pull your adhesive protectors off you would think it should be set it and forget it. I tried weighing it down over night and the glass still is popping up. Everything works fine but the original glass has much more adhesive to hold the glass in place.

I just completed the repair of my iPad mini2 digitizer screen. all appears to have gone well. It took a couple of hours and required exceptional patience and care. I used a heat gun rather than a blow dryer. I recommend watching several videos on youtube first as the directions provided suggest a full tear-down that may not be required. product was good but be warned, not for most consumers. best of luck.

The digitizer is working good so far. The only cons I have with this product are; the tape that comes on the digitizer, it isnt strong at all, and the second thing is the home button. After I finished the install the home button was very loose and I really had to press down in order to get it to click. Other than that its a great product, loved the tools that were included and thanks for covering all the copper for me to avoid the ghost tapping.

Easy to replace with videos from youtube. Screen was packaged well, had neighbor kid toss it over a 6 ft fence on to the concrete and no issues. Home button more solid that other screens i have used. Updated a few weeks after install. The adhesive they use sucks. The ipad was sitting the cabinet and the screen fell off.

I was skeptical reading the negative reviews but the install was not all that difficult. You have to be very patient and delicate with the process. I used a hairdryer and a microfiber cloth of my own and the rest of the tools came with the screen replacement. I also used a YouTube video over the written instructions it came with. Install took about 30-40min, I think next time it will take half the time. For $20 my iPad is useful again!! I did not have the adhesive issue on the screen previous reviewers had...maybe they fixed this?

Very good replacement

The adhesive didn’t stick well!