Furniture Anchors (10 Pack) Anti Tip Furniture Straps for Baby Proofing, 400lbs Tension Earthquake Resistant Metal Straps, Furniture Wall Anchor Prevent Baby Pet from Falling Furniture

Do not use this product to protect your little ones. Spend the extra money and get a better product. The anchors provided are garbage and can only hold about 20 lbs. I used better ones, but the retention cable is useless. I broke 3 with only 10 lbs of force! The cable might stand up the the advertised 40lbs, but the connector definitely does not. This product is advertised to protect your children from falling furniture. Do not trust it. It is not safe

I actually used these to secure down my outdoor sectional to my deck. I live in a very windy area & I was tired of things blowing away. They have worked perfectly, even had at 55mph gust and nothing budged! Very happy!

Very easy to install and is very secure

These were pretty straight forward and relatively easy to install. They seem sturdy although we havent tested it out. The only issue I have is that one of the wire cords has the wrong size male part for the female threading making it defective. So I basically cant use one of these unless I find another cord.

It works. What else can you say?

I needed to secure a tall,6+ feet tall unit that holds all my quilting fabric. A little cumbersome to get everything lined up. The biggest challenge was looping the wire through enough times to keep it from wobbling and pitching forward . Still a bit of play but looks like it’s holding ok

Make sure that you check the cables before installing. Inspect and test to make sure that they are made properly and will not pull apart where the connectors are crimped onto the wires. There were two defective cables in the set I bought. I was able to pull one off the connector by hand and can tell that another was poorly secured. This is dangerous and with poor quality control.

like it very happy feel good about it

They seemed sturdy during installation. The brackets are nice and thick metal and don’t bend when you add pressure. The first one I installed was on a bookcase and it was close enough to the wall that I could feed the wire through the brackets twice and double up the strength. I tested it by pulling the the case a little bit and it seemed like it was going to work well. Then I moved on to the baby changing table and got it installed but because of where I had it attached, I was only able to feed the wire through the brackets once. I gave it a light pull and it instantly popped the wire from the wire clasp, rendering the wire useless. I thought maybe it was just one defective wire so I fed a new wire through and pulled (again very lightly) and it popped the wire from the clasp portion again. I thought maybe I was just being too rough with it until I got a third one out, screwed the end together and pulled on both ends without attaching it to the brackets. I was able to break the clasp from the wire pretty easily with my bare hands, which is a way less tension than the weight of a piece of furniture.

Clear instructions, everything included, easy to use. You can double up the attaching wire or probably use it in one loop if you need more distance between the object and the wall. Good price for 10.