Gorilla Waterproof Caulk & Seal 100% Silicone Sealant, 10oz Cartridge, Clear (Pack of 1)

(0 Reviews)

Price
$12.31

Style
Quantity
(40000 available )

Total Price
Share
99 Ratings
64
19
8
7
1
Reviews
  • Mojos Beads

    Greater than one week

    The caulking in my shower started to become moldy, so I removed that old caulk and re-caulked it with a DAP brand caulk that I bought at a local store. The color matched (almond) however just a few days after laying it down I noticed spots of molding. After further investigation I discovered that the product was disintegrating away from water hitting it! I just dont understand how that could happen to caulk. Anyway after researching what a very good brand of caulk would it be, it led me to this product. I found it very easy to use, and it does dry fast. I would say that it does take longer than 30 minutes, but it does not take anywhere near 24 hours. As far as the chemical smell, yes there is an odor however it is really not that bad at all. It will linger in the bathroom for just a few hours and then go away. The product is more of a silicone type seal, and it has been doing great. Water beads right off of it. I would recommend this caulk to anyone looking to fix their bathroom seals.

  • Liz Hamilton

    > 3 day

    This stuff works great! We had a bad sugar ant infestation, so we used this to seal every crack in our kitchen so they couldn’t get in! Worked like a charm! I will warn you this stuff smells VERY strong so keep your work space we’ll ventilated. It’s also very sticky so we used a plastic putty knife to smooth the edges down and make a good seal on things, then wiped the knife on paper towels to prevent build up. Happy sealing!

  • Mellow

    > 3 day

    Cut off tip a checked. Hole looked good but caulk would not come out. Enlarged and still no caulk inserted wire into tip. Wire broke through the blockage, afterward flowed hit and miss.

  • Sara H.

    Greater than one week

    As soon as I went to use the product it immediately busted open at the end and got all over my clothes and skin. Please be aware this is a skin irritant and to wear gloves and possibly long sleeves when using this product. Not sure if this bottle is defective, but it was not fun removing from skin. Was unable to remove from clothing.

  • Ryan

    > 3 day

    This caulking smells so bad I thought my sewer lines were backed up in my bathroom and was going to call a plumber. It’s been a few days since I applied it and it still smells. I’m not sure what’s going on.

  • Robert Peters

    > 3 day

    The seal this makes is durable and dries in a reasonable time. If the entire tube is not used it will reseal itself. So take a larger piece below the first cut and push out the sealed amount. This version is not easily paintable but it can be done by spraying over it once its dry with liquid rubber.

  • Jae

    > 3 day

    Smells completely toxic and will definitely cause migraines for a few hours. I made the mistake of caulking the inside of the cabinet under my sink without a mask and the smell stung my nose immediately and I felt it go down lungs. It stunk up my kitchen for an entire day and I had air out my kitchen with a strong fan for a whole day until it finally went away. After the smell had gone away, I checked the caulk and it was dried out but still had a rubbery feel to it. All in all, its a great caulk and it gets the job done. I recommend using a gas mask when applying and only use for outdoors.

  • Ramblincowboy

    > 3 day

    Works great!

  • Chris W. Brown

    > 3 day

    Use this. Nothing else. Just this. Be sure to get the surface VERY clean first.

Gorilla Waterproof Caulk & Seal 100% Silicone Sealant* seals out water, air and moisture and is great for kitchen, bath, window, doors, auto, marine plumbing, gutters and more! Ready for water exposure in just 30 minutes, this waterproof sealant is & resistant. This clear silicone sealant won"t yellow, shrink or crack over time!

**Note: Do not use on wet, damp, frozen or contaminated surfaces. Not paintable. Not for use in underwater applications, aquariums, on brick, masonry, cementitious materials or on metals sensitive to corrosion including brass & galvanized metals. For general auto/marine applications – not for under hood or direct gasoline exposure.

TO OPEN:
Cut nozzle at 45° angle to desired bead size. Puncture inner foil seal.

TO USE:
All surfaces should be clean and free of dirt, grease, oil and old sealant. For gaps larger than ½ inch use backer rod. Best if applied above 40°F (5°C).
1) Insert into cartridge gun.
2) Apply sealant, pushing bead ahead of nozzle.
3) Smooth bead immediately after application, before skin forms.

30 MINUTE RAIN/SHOWER READY: Can be exposed to water in as little as 30 minutes based on a 3/16” bead at 70°F (21°C) and 50% humidity. Otherwise, wait 24 hrs.

STORAGE: Replace cap tightly to prevent material from curing. Store in cool, dry location. To re-use nozzle, remove sealant from nozzle once cured.

CLEAN-UP: Wipe wet sealant off project immediately with a dry cloth. Isopropyl alcohol may be used according to solvent manufacturer’s instructions.

Click on the Gorilla link at the top of the page to see more Gorilla Tough products.

Related products

Shop
( 542 Reviews )
Top Selling Products