Gorilla Waterproof Caulk & Seal 100% Silicone Sealant, 10oz Cartridge, Clear (Pack of 1)

(0 Reviews)

Price
$12.31

Style
Quantity
(40000 available )

Total Price
Share
99 Ratings
64
19
8
7
1
Reviews
  • dianna f mabry

    Greater than one week

    Probably the only silicone I will use from now on

  • Ryan

    > 3 day

    This caulking smells so bad I thought my sewer lines were backed up in my bathroom and was going to call a plumber. It’s been a few days since I applied it and it still smells. I’m not sure what’s going on.

  • Zito Family

    > 3 day

    This is an excellent sealant. I’ve used a lot of caulks, and this is one that holds true to it’s stated cure time of 30 minutes, even in wet conditions. I used this to seal a few gaps on my porch because water was getting into the house through the brick of my mud room steps. This worked great. I used a standard caulk gun to apply it. The only negatives I will say is that it lays on pretty thick. Most clear caulks dry truly clear, this looks more like a thick glue so it isn’t the prettiest application. Also, it’s pretty slick — my porch got very slippery along the wood until I scraped away the excess. Overall, great.

  • CorMack

    > 3 day

    We used this product for patio roof panels. It was easy to use, easy to clean up, and works great because it rained less than 24 hours after applying and there were no leaks. Will purchase again!

  • Ale

    > 3 day

    Does the job but its hard to clean like most glues.

  • LA_Clow

    Greater than one week

    Its a nice product that have shown what it can do once its dried longer than 30 minutes. Saturday I used this sealant to chaulk my windows and doors. It was around 42°F when I had done it. It had started to rain around 4 hours after. The next day was around 47°F. I checked the sealant to see if any cracks were present. Ran my finger on the sealant to find out it hadnt completely set. Watery sealant on my finger. Sorry, dont trust the Thirty Minute Rule. So today I applied it on the back side of the house with 61° with sun/no clouds. Will check tomorrow if all is well.

  • Rick Dennis

    > 3 day

    Was just as advertised. Was easy to apply and looked good. I mainly chose this one because it had the shortest curing time. Plus Gorilla brand had a pretty good reputation. Pleased with the outcome.

  • Sara H.

    > 3 day

    As soon as I went to use the product it immediately busted open at the end and got all over my clothes and skin. Please be aware this is a skin irritant and to wear gloves and possibly long sleeves when using this product. Not sure if this bottle is defective, but it was not fun removing from skin. Was unable to remove from clothing.

  • Patti Poppins

    > 3 day

    Built 10 scoreboard for our shuffleboard club. Used gorilla silicone to seal it from the rain. So far seems good. Easy to work with. Dries to the touch in about 2 hrs. Full cure in 24. Good product

  • James Tiberias Kirkland

    > 3 day

    This product is nothing short of amazing. I have never seen caulking apply so smoothly - no air bubbles whatsoever. It makes a rookie such as myself - look great. It applies like liquid glass - clear from the tube. I have never seen anything like this product. Not to forget cleanup. Cleaning up after usage is very easy. All of the blocks are checked off with this product. Try it - and you will see how amazing it is.

Gorilla Waterproof Caulk & Seal 100% Silicone Sealant* seals out water, air and moisture and is great for kitchen, bath, window, doors, auto, marine plumbing, gutters and more! Ready for water exposure in just 30 minutes, this waterproof sealant is & resistant. This clear silicone sealant won"t yellow, shrink or crack over time!

**Note: Do not use on wet, damp, frozen or contaminated surfaces. Not paintable. Not for use in underwater applications, aquariums, on brick, masonry, cementitious materials or on metals sensitive to corrosion including brass & galvanized metals. For general auto/marine applications – not for under hood or direct gasoline exposure.

TO OPEN:
Cut nozzle at 45° angle to desired bead size. Puncture inner foil seal.

TO USE:
All surfaces should be clean and free of dirt, grease, oil and old sealant. For gaps larger than ½ inch use backer rod. Best if applied above 40°F (5°C).
1) Insert into cartridge gun.
2) Apply sealant, pushing bead ahead of nozzle.
3) Smooth bead immediately after application, before skin forms.

30 MINUTE RAIN/SHOWER READY: Can be exposed to water in as little as 30 minutes based on a 3/16” bead at 70°F (21°C) and 50% humidity. Otherwise, wait 24 hrs.

STORAGE: Replace cap tightly to prevent material from curing. Store in cool, dry location. To re-use nozzle, remove sealant from nozzle once cured.

CLEAN-UP: Wipe wet sealant off project immediately with a dry cloth. Isopropyl alcohol may be used according to solvent manufacturer’s instructions.

Click on the Gorilla link at the top of the page to see more Gorilla Tough products.

Related products

Shop
( 1710 Reviews )
Top Selling Products