GRAFF Termit 4 1/2 Inch Cut Off Wheel for Wood, Laminate, Plastic - Angle Grinder Wood Cutting Disc 4.5 Inch - Tungsten Carbide - 115 mm
-
Mike
> 3 dayWhile installing Triumph luxury vinyl plank on 1100 square feet of my home, I quickly learned that this brand of LVP eats steel blades of circular saws, jigsaws, oscillating tools, chisels, and planes for breakfast. I needed a solution that would cut LVP on a table saw and on an angle grinder without having to burn through lots of blades. This Graff blade is a freaking beast. In cut after cut I encountered no dulling, and the finish is excellent. Since the hole in the Graff blade is the wrong size for my table saw, I used the mandrel from my angle grinder as an adapter on the saw, and it worked great.
-
B. Petersen
> 3 dayThis blade did exactly what I hoped it would. Made easy work of some nasty flush cuts in 2x6 pine. Very well made, no wobbles, cuts right through. This is a high quality piece. Ill look for this brand again.
-
Todd D. Obrien
> 3 dayI bought this for power carving. Its a bit scary (absolutely use the blade guard on your grinder) but cuts wood like butter. Unless I hit a nail or something this blade should last a long long time.
-
Krunal
> 3 dayGreat for demo, and rough freehand cuts. Be safe it does not kick back like circular saws
-
DMV
> 3 dayVery nice cutter for my high speed cutting tool
-
Tiki
Greater than one weekGreat quality. Lighter than I thought, which is good. The carbide teeth are wicked sharp. I actually used this not for its intended use but instead cut through some aluminum like butter. Probably not good for the life of the blade though. Bought another one in 4.5”.
-
Dan from WI
Greater than one weekEspecially liked the safe control this cutter permitted. First used for carving 2x4 and strand board around a door to provide clearance for metal brick molding.
-
Clint Everett Hanson
Greater than one weekI am so very happy about the quality and possibilities of work I can create.
-
Mohammad Shahzad Aslam
> 3 dayQuality blade thin profile for precise cuts. Much thinner than the speed cutter which I also bought. The speed cutter is better for rough use demolitions cuts taking things apart or shaping etc bs this blade is better for straight line cuts plus can go through nails
-
Ariel Chacon
Greater than one weekEl producto ha sido utilizado para cortar madera como es conocido. Se observa dureza . Me ha servido para trabajos en casa
INNOVATIVE WOOD CUTTER GRAFF TERMIT
4 ½ Inch (115 mm)
Grinding wheel GRAFF Termite is designed for woodworking and cutting of other materials derived from wood. This is a relatively new type of angle grinder accessories, designed for cutting wood of any type and hardness. It is intended for installation on small-sized angle grinders with a bore diameter of not more than 7/8" (22.23 mm).
This is a unit-cast wood carving disc with sawed teeth. Grit is applied with thermal pressing at the edges of these teeth. Abrasive having high strength and large sizes can cut not only wood but also wood with nails.
Characteristics:
- Type: Wood cutting and carving disc
- Working materials: Wood, plastic, laminated flooring, parquet (hardwood), plasterboard, MDF, etc.
- Diameter: 4 ½" (115 mm)
- Arbor: 7/8" (22.23 mm)
- Thickness: 2 mm
- Maximum speed: 13 200 RPM
ATTENTION! DANGER!
Using these types of angle grinder discs can endanger your life as they uncontrollably crash into working material. The big number of teeth on such discs combined with a high RPM rate of an angle grinder can lead to serious injuries.
Working with wood carving disc GRAFF Termit, as well as with GRAFF Speedcutter, is safer than with 6 teeth wood carving disc and wood carving chainsaw disc.
SMOOTH AND CLEAN CUT WITH GRAFF TERMIT
This angle grinder cutting wheel has a special design in which the disc body has feed stop. This prevents the disc from being submerged into the material uncontrolled, which in turn prevents the kickback.
* Safe wood cutting with a grinder - when observing all safety instructions and wearing personal safety accessories.
- NOT designed for metal cutting.
|
|
|
|
|
|---|---|---|---|
CUTTINGThis angle grinder cutting wheel is specially designed for CUTTING of wood and materials derived from it at high rotational speed. |
CARVINGThe grinder shaping disc is ideal for CARVING of wood, plastic, laminated flooring, parquet (hardwood), plasterboard, MDF, etc. |
MINIMUM KERF THICKNESSClean and thin cut is provided thanks to the minimum kerf thickness 2.0 mm. |
TUNGSTEN CARBIDE GRITTungsten carbide grit protrudes beyond the plane of the disc body, making it possible to groove the wood. Also due to the quality of tungsten carbide grit accurate and fast work with material is achieved. |
|
|
|
|
|
|
|---|---|---|---|---|---|
| GRAFF Termit 5" | GRAFF Diamond saw blade 8" | GRAFF Speedcutter 4 ½" | GRAFF Diamond saw blade set 4 ½" | GRAFF Black 4 ½" | |
| Working materials: | Wood, plastic, laminated flooring, parquet (hardwood), plasterboard, MDF(hardboard) and chipboard | Concrete, artificial stone, paving flag, kerb, brick | Wood, aerated concrete, plasterboard, plastic, plywood, laminated flooring, parquet (hardwood), plasterboard, MDF(hardboard) and chipboard | Concrete, artificial stone, paving flag, kerb, brick, ceramic, tile | Sheet metal, rebar, stainless steel, aluminum, cast iron, metal pipes and profiles |
| Diameter: | 5" (125 mm) | 8" (200 mm) | 4 ½" (115 mm) | 4 ½" (115 mm) | 4 ½" (115 mm) |
| Arbor: | 7/8" (22.23 mm) | 7/8" (22.23 mm) | 7/8" (22.23 mm) | 7/8" (22.23 mm) | 7/8" (22.23 mm) |
| Thickness: | 2 mm | 2.4 mm | 4 mm | 2 mm/2.5 mm/2 mm | 1.5 mm |
| Maximum speed: | 12 250 RPM | 7 600 RPM | 13 200 RPM | 13 300 RPM | 13 200 RPM |