GRAFF Termit 4 1/2 Inch Cut Off Wheel for Wood, Laminate, Plastic - Angle Grinder Wood Cutting Disc 4.5 Inch - Tungsten Carbide - 115 mm
-
Dan from WI
> 3 dayEspecially liked the safe control this cutter permitted. First used for carving 2x4 and strand board around a door to provide clearance for metal brick molding.
-
Renato
> 3 dayMy angle grinder keep jumping off the wood I am cutting (lip of the steps of stairs) so I just stopped using it after the second step was done to avoid any injury to myself. I used jigsaw instead to finish the job. It took me a long time to finish the project but at least I was safe.
-
Iolli
> 3 dayWorks great
-
SSR
> 3 dayQuality and performance
-
JHWHITELOCK
> 3 dayGreat product.. very solid and works well with a grinder. it makes very clean cuts quickly
-
Ariel Y.
> 3 dayVery good
-
Todd D. Obrien
> 3 dayI bought this for power carving. Its a bit scary (absolutely use the blade guard on your grinder) but cuts wood like butter. Unless I hit a nail or something this blade should last a long long time.
-
Rafa
> 3 dayHeres to a simple product that actually works!
-
F. C. K. III
> 3 dayDidnt last that long before cuts started to burn through the wood rather than cut. Used this blade to make an awkward 24 linear ft of cuts through 5/8 exterior grade plywood flooring.
-
TJ Bolt
Greater than one weekLove it. Best option if you need to cut wood using an angle grinder. Holding up well under tough conditions.
INNOVATIVE WOOD CUTTER GRAFF TERMIT
4 ½ Inch (115 mm)
Grinding wheel GRAFF Termite is designed for woodworking and cutting of other materials derived from wood. This is a relatively new type of angle grinder accessories, designed for cutting wood of any type and hardness. It is intended for installation on small-sized angle grinders with a bore diameter of not more than 7/8" (22.23 mm).
This is a unit-cast wood carving disc with sawed teeth. Grit is applied with thermal pressing at the edges of these teeth. Abrasive having high strength and large sizes can cut not only wood but also wood with nails.
Characteristics:
- Type: Wood cutting and carving disc
- Working materials: Wood, plastic, laminated flooring, parquet (hardwood), plasterboard, MDF, etc.
- Diameter: 4 ½" (115 mm)
- Arbor: 7/8" (22.23 mm)
- Thickness: 2 mm
- Maximum speed: 13 200 RPM
ATTENTION! DANGER!
Using these types of angle grinder discs can endanger your life as they uncontrollably crash into working material. The big number of teeth on such discs combined with a high RPM rate of an angle grinder can lead to serious injuries.
Working with wood carving disc GRAFF Termit, as well as with GRAFF Speedcutter, is safer than with 6 teeth wood carving disc and wood carving chainsaw disc.
SMOOTH AND CLEAN CUT WITH GRAFF TERMIT
This angle grinder cutting wheel has a special design in which the disc body has feed stop. This prevents the disc from being submerged into the material uncontrolled, which in turn prevents the kickback.
* Safe wood cutting with a grinder - when observing all safety instructions and wearing personal safety accessories.
- NOT designed for metal cutting.
|
|
|
|
|
|---|---|---|---|
CUTTINGThis angle grinder cutting wheel is specially designed for CUTTING of wood and materials derived from it at high rotational speed. |
CARVINGThe grinder shaping disc is ideal for CARVING of wood, plastic, laminated flooring, parquet (hardwood), plasterboard, MDF, etc. |
MINIMUM KERF THICKNESSClean and thin cut is provided thanks to the minimum kerf thickness 2.0 mm. |
TUNGSTEN CARBIDE GRITTungsten carbide grit protrudes beyond the plane of the disc body, making it possible to groove the wood. Also due to the quality of tungsten carbide grit accurate and fast work with material is achieved. |
|
|
|
|
|
|
|---|---|---|---|---|---|
| GRAFF Termit 5" | GRAFF Diamond saw blade 8" | GRAFF Speedcutter 4 ½" | GRAFF Diamond saw blade set 4 ½" | GRAFF Black 4 ½" | |
| Working materials: | Wood, plastic, laminated flooring, parquet (hardwood), plasterboard, MDF(hardboard) and chipboard | Concrete, artificial stone, paving flag, kerb, brick | Wood, aerated concrete, plasterboard, plastic, plywood, laminated flooring, parquet (hardwood), plasterboard, MDF(hardboard) and chipboard | Concrete, artificial stone, paving flag, kerb, brick, ceramic, tile | Sheet metal, rebar, stainless steel, aluminum, cast iron, metal pipes and profiles |
| Diameter: | 5" (125 mm) | 8" (200 mm) | 4 ½" (115 mm) | 4 ½" (115 mm) | 4 ½" (115 mm) |
| Arbor: | 7/8" (22.23 mm) | 7/8" (22.23 mm) | 7/8" (22.23 mm) | 7/8" (22.23 mm) | 7/8" (22.23 mm) |
| Thickness: | 2 mm | 2.4 mm | 4 mm | 2 mm/2.5 mm/2 mm | 1.5 mm |
| Maximum speed: | 12 250 RPM | 7 600 RPM | 13 200 RPM | 13 300 RPM | 13 200 RPM |