GRAFF Termit 4 1/2 Inch Cut Off Wheel for Wood, Laminate, Plastic - Angle Grinder Wood Cutting Disc 4.5 Inch - Tungsten Carbide - 115 mm
-
Mike
> 3 dayWhile installing Triumph luxury vinyl plank on 1100 square feet of my home, I quickly learned that this brand of LVP eats steel blades of circular saws, jigsaws, oscillating tools, chisels, and planes for breakfast. I needed a solution that would cut LVP on a table saw and on an angle grinder without having to burn through lots of blades. This Graff blade is a freaking beast. In cut after cut I encountered no dulling, and the finish is excellent. Since the hole in the Graff blade is the wrong size for my table saw, I used the mandrel from my angle grinder as an adapter on the saw, and it worked great.
-
Krunal
> 3 dayGreat for demo, and rough freehand cuts. Be safe it does not kick back like circular saws
-
Al H.
> 3 dayI used this on LVT tile. It cuts so smoothly, it was almost as though the tile was melting away as I cut. It cuts so effortlessly, that its important to make sure that it doesnt drift off the line of the cut. Because of the efficiency of the cut close attention to the cutting line is necessary.
-
C. Yin
Greater than one weekI own both GRAFF Termit and Speedcutter. I find both are useful. Speedcutter is excellent for crude fast wood cutting where precision isnt required. Its excellent for fast carving. Speedcutter cuts extremely fast. Speedcutter blade replaces my circular saw. I use Termit to make precision cuts. It cuts slower but it cuts very thin and precise. This cut is similar to cuts from multitool. Termit blade replaces my Dewalt multitool. Eversince I got both Termit and Speedcutter, I didnt need my circular saw and multitool.
-
Clint Everett Hanson
> 3 dayI am so very happy about the quality and possibilities of work I can create.
INNOVATIVE WOOD CUTTER GRAFF TERMIT
4 ½ Inch (115 mm)
Grinding wheel GRAFF Termite is designed for woodworking and cutting of other materials derived from wood. This is a relatively new type of angle grinder accessories, designed for cutting wood of any type and hardness. It is intended for installation on small-sized angle grinders with a bore diameter of not more than 7/8" (22.23 mm).
This is a unit-cast wood carving disc with sawed teeth. Grit is applied with thermal pressing at the edges of these teeth. Abrasive having high strength and large sizes can cut not only wood but also wood with nails.
Characteristics:
- Type: Wood cutting and carving disc
- Working materials: Wood, plastic, laminated flooring, parquet (hardwood), plasterboard, MDF, etc.
- Diameter: 4 ½" (115 mm)
- Arbor: 7/8" (22.23 mm)
- Thickness: 2 mm
- Maximum speed: 13 200 RPM
ATTENTION! DANGER!
Using these types of angle grinder discs can endanger your life as they uncontrollably crash into working material. The big number of teeth on such discs combined with a high RPM rate of an angle grinder can lead to serious injuries.
Working with wood carving disc GRAFF Termit, as well as with GRAFF Speedcutter, is safer than with 6 teeth wood carving disc and wood carving chainsaw disc.
SMOOTH AND CLEAN CUT WITH GRAFF TERMIT
This angle grinder cutting wheel has a special design in which the disc body has feed stop. This prevents the disc from being submerged into the material uncontrolled, which in turn prevents the kickback.
* Safe wood cutting with a grinder - when observing all safety instructions and wearing personal safety accessories.
- NOT designed for metal cutting.
|
|
|
|
|
|---|---|---|---|
CUTTINGThis angle grinder cutting wheel is specially designed for CUTTING of wood and materials derived from it at high rotational speed. |
CARVINGThe grinder shaping disc is ideal for CARVING of wood, plastic, laminated flooring, parquet (hardwood), plasterboard, MDF, etc. |
MINIMUM KERF THICKNESSClean and thin cut is provided thanks to the minimum kerf thickness 2.0 mm. |
TUNGSTEN CARBIDE GRITTungsten carbide grit protrudes beyond the plane of the disc body, making it possible to groove the wood. Also due to the quality of tungsten carbide grit accurate and fast work with material is achieved. |
|
|
|
|
|
|
|---|---|---|---|---|---|
| GRAFF Termit 5" | GRAFF Diamond saw blade 8" | GRAFF Speedcutter 4 ½" | GRAFF Diamond saw blade set 4 ½" | GRAFF Black 4 ½" | |
| Working materials: | Wood, plastic, laminated flooring, parquet (hardwood), plasterboard, MDF(hardboard) and chipboard | Concrete, artificial stone, paving flag, kerb, brick | Wood, aerated concrete, plasterboard, plastic, plywood, laminated flooring, parquet (hardwood), plasterboard, MDF(hardboard) and chipboard | Concrete, artificial stone, paving flag, kerb, brick, ceramic, tile | Sheet metal, rebar, stainless steel, aluminum, cast iron, metal pipes and profiles |
| Diameter: | 5" (125 mm) | 8" (200 mm) | 4 ½" (115 mm) | 4 ½" (115 mm) | 4 ½" (115 mm) |
| Arbor: | 7/8" (22.23 mm) | 7/8" (22.23 mm) | 7/8" (22.23 mm) | 7/8" (22.23 mm) | 7/8" (22.23 mm) |
| Thickness: | 2 mm | 2.4 mm | 4 mm | 2 mm/2.5 mm/2 mm | 1.5 mm |
| Maximum speed: | 12 250 RPM | 7 600 RPM | 13 200 RPM | 13 300 RPM | 13 200 RPM |