JAYO 3D Printer Photopolymer Resin, 405nm UV Light Curing Standard Resin, Suitable for 2K 4K 6K 8K LCD 3D Printers, Black 1000g

Bought this on a whim since it was much lower priced than the usual Anycubic Eco Resin I was buying and I was already considering trying a new brand at some point, so I rolled the dice on this, and have to say Im really surprised how nice my first print with it came out. I was pretty hesitant for a minute since it was so cheap and I had never heard this brand before. The smell was no worse than the Anycubic Eco resin I was using and I might even say its a little less strong, unless its just me already being used to it. This is a more true gray than Anycubics gray, which was more blueish tint than gray. Details show a lot better on this color. If this stuff stays the nice price it was at the time I bought it, I might just have to make it my new go to resin. Dont hesitate to try it because its cheap. This print I attached was printed on the Anycubic Photon Mono 4k printer.

I was apprehensive at first being that this is priced so much lower then most other companies. That being said this resin has preform over and over again with out any issues evey time I purchase it . This resin is my go to. The print quality is amazing! A word of warning though , this resin is a bit of a bear to clean if you are not using 90%+ isopropyl alcohol to clean it. I have discovered that you can also use acetone to clean prints made from this, Dont let them sit in it though I use a large mason jar with a lid , fill it with acetone and then add my parts , slowly moving the parts around in the jar for a 5-10 min , I then dump out the part rinse with water and let dry .

Item shipped quick. It has a thinner consistency when you compare it to other resins but it prints absolutely beautiful even with stock slicer settings. Will be buying other colors to try them out.

Just decided to try this resin because the price wasnt bad and I needed something quick. The result were bad the resin cure well in my halot sky 4k resin printer. The only caveat is make sure you get the bottom exposure time right I find i need a slightly higher setting. Other than that everything works fine.

Great resin. Works great. Prints come out perfectly. Clear is nice and not hazy

Updated review I was a little hesitant of this resin at first. I got it back in the end of 2021 during their 2kg for $25 sale and really wanted to like it. I got okay use out of the black but seemed to have too many issues for it to really be worth it. Once I started using the transparent resin though everything changed. I love the transparent and it is now my go to resin for most everything. Durability: You wont be getting any ABS like resin durability out of this, but I have found its quite durable. Ive dropped my models on the wooden floor many of times and only really had issues with cracking on very delicate parts such a as bows, belts, and strands of hair. I do often drill and tap the prints with my Dremel and have never had issues with it being too fragile. Its probably not best for high intensity parts but itll work great for figures and miniatures (I print up to 1/3 scale and it supports its own weight very well after over a year standing) Smell: Its right in the middle. There are definitely some light fumes from this resin and I wouldnt recommend using it without any ventilation. Having said that I would also say it is significantly better than some other resins Ive used, especially cheaper ones. Print quality: I havent had any issues with the quality of the prints Ive had after over a year. All the details are crisp and the resin cleans very easily with mean green or isopropyl alcohol. The transparent does have to be babied a bit more than other clear resins to get that really clear look. I typically cure mine in water to help and then wet sand from 1000->5000 grit before clear coating it if I want a good glass look to it. I have included what it looks like normally cured without sanding in my photos of cooler (I over cured it a bit so it lost too much of its clear look. A bit of clear coat will bring back the look more or less). The transparent does take a fraction or two more per layer to cure, I dialed mine in at 1.9seconds per layer at 50% power on my anycubic mono x, but every printer is different slightly. Price: By far the best reason to get this resin. I almost exclusively buy from Jayo because of how dirt cheap it is. There are a few cheaper resins ($13-$17 a kg) on Amazon, but theyre either hot or miss for every bottle or downright terrible. A lot of times you can still even get the 2kg for $25 bottle deal (most people have good results with black, but I dont think I calibrated properly for it). I get transparent for about $17/$18 a kg and I think its by far one of the best deals for resin. TLDR PRO- dirt cheap, great results, decently durable, smell isnt too strong, lots of colors options, easily able to be drilled by hand CONS- there are more durable high end resins out there, the clear wont be as transparent as some high end brands, I had trouble with the black resin personally, it does have a smell. All in all I would recommend this resin and I will be buying a lot more of it as long as it stays this price.

I like this resin, very cheap and comparable to a lot of my mid grade resins that run twice this price. Im gonna start using this resin for my draft prints.

Ive been looking for good clear resin that does not yellow when it gets cured and this Jayo transparent turned out the clearest over brands costing 3 to 4 times the money. I have tried 8 clear resins from various brands and as far as looks go Jayo wins. Also was the easiest to calibrate on a Elegoo saturn 25s/4l 2.2s on vroom settings. Last but not least very low odor.

I have been using another brand of resin for years and decided to try other options. The Jayo resin works great in my Phenoms and my Phrozen Mega 8k. The parts look good with all the details and they sand well.

Im new at resin printing and have stayed with the first resin brand I purchased so I didnt need to dial in a new resin. After receiving some bad product I decided to check out other brands. I have used Jayo brand filament in my fdm printers with success. I needed one small piece to complete a print I am doing so just poured in the resin and hit print. No calibration. I am very pleased with the results. The print was successful first attempt. The piece came out with good detail. I didnt find the odor to be as strong as the previous resin I have been using. I will be purchasing more of this.