KMC Smart Tap 2-Pack, 4-Outlet Smart Plug WiFi Outlet Wall Tap, Energy Monitoring, Works with Alexa and Google Home, Remote Control Your Devices from Anywhere, No Hub Required, ETL Certified, White

This product works as expect; however it has a flowed design. This is designed to plugin to a wall outlet. However, with the plastic post on the top and the 3-prong plug at the bottom, it will not stay in the wall outlet stably. Its own weight plus additional weights from outside plugs will make this loose. I have tried multiple outlets in my house and the result is all the same. I found an easy fix to this: turn my wall outlet upside-down. With this fix, the 3-prong will be at the top while the plastic post at the bottom, the outlet can stay stable.

Great product great price

I had bought these couple of years back, and happy that they are still allowing to flash tasmota through old firmware (which is a good thing).

These work but could be better

Model 30608 was shipped to me in the end of November 2020. Used tuya-convert to upgrade firmware to the open-source Tasmota firmware without any issues. I used the following template without issue: {NAME:KMC 4 Outlet,GPIO:[0,56,0,0,133,132,0,0,130,22,23,21,17],FLAG:0,BASE:36} Now I can program the outlet to turn on and then off again after fifteen minutes -- perfect for when I forget to turn off the coffee maker.

Had hoped to use this to control individual outlet connections via Alexa. I spent a couple of hours repeating the instructions. While the strip finally paired with the KMC app, and the app was successfuly added to the Alexa app as a smart home skill, the power strip was never identified and paired by Alexa. So I have to control things manually via KMC app. Also WIFI compatibility issues with new WIFI 6 networking in my home. Disappointing.

I had no problem setting the switch up. It works great with Alexa. Ive not had it disconnect once in 2 months.

Its easy to connect to the wifi and the app is simple to use. It has energy usage but its not by individual plug its for the entire 4 outlets. It would be better if it could connect to smartthings but for now I have to use a separate app to turn it on and off. You can also set a schedule per outlet. The bottom outlet is always on so you have 3 controllable outlets and 1 that is always on.

This is a decent smart plug pack for the money. I have opened up the plugs and the quality inside is not the best, so I would not use these for Watt heavy equipment as this can melt. But it works great with stuff that draws less current, I would not use this to automate a space heater. The best selling point for me was the ability to flash Tasmota into this unit so I can use it with my Smartthings ecosystem. The integration was good and it showed up in my Smartthings. It also works with the Smart Life app if you dont have the Smartthings ecosystem. One thing to mention is these are not individually metered/ The first plug is the only one that will show metered and it basically sums up the usage of all 3 plugs. Also, the 4th plug is not controllable, its an always-on plug. I did notice that sometimes the unit loses its connection, and I have to unplug and plug it back in to connect to the wifi. But this has happened only a handful of times.

Its great that you can name and control EACH port separately via Alexa, via the KMC Smart app. You download KMC smart app and then choose the KMC Smart skill from Alexa. I bought (4) and immediately programmed two. Upon command, it will turn on 2 of three lights and not the 3rd, then the next time the 1 light and not the other two, then the next week it would do all. I kept the two because I need the outlets, but returned the other two before installing. I just wont rely on voice control for those.