LIAN LI High Airflow Micro ATX PC Case, RGB Gaming Computer Case, Mesh Front Panel Mid-Tower Chassis with 2x140mm ARGB PWM Fans Pre-Installed, Tempered Glass Side Panel (LANCOOL 205M MESH, Snow)

This case is not the greatest case in the world. The magnetic filter on the top slides around too much. The side panels dont have the greatest fit tolerances Ive ever seen on a case. The hard-drive bay in the bottom is virtually useless, because you cant run any significant number of power cables past them from the PSU to the rest of the computer. The cables running to the daughter board are delicate to the point where I was concerned about accidentally damaging them. There are a lot of individual screws, many of which I really wish were captive so you didnt have to worry about loosing/misplacing them. The metal outside panels are flimsy and a bit thin. There are no good dust-filters built into the system. But despite all these shortcomings, Im very happy with this case. The fans are great, relatively quiet and with fancy lights that plug onto the RGB header on your motherboard. Youve got a great selection of front IO ports, though most budget oriented motherboards out there that Ive seen dont have a USB C header, making the inclusion of a USB C port for front IO a bit of a waste. I would have rather seen a 3rd non-USB C port, but the 2 that are there are certainly welcome. The air flow is great, keeping my GPU and CPU cool with only an additional CPU cooler needing to be installed (Ryzen 5700x and Radeon 6700xt). The case was shipped with good packing materials, making me optimistic that the glass panel would not be damaged in transit. The instructions arent the best Ive ever seen, but I was able to follow them without any great degree of trouble. Youve got good Sata SSD mounts hidden between the motherboard panel and the outside non-glass panel. Cable management options are (hard-drive bay aside) excellent, with lots of intelligently placed gaps and clear routing lanes. Its well optimized, so the case doesnt have any huge dead zones of empty space, and as a result is more compact than you might expect from a desktop case. It supports a variety of configurations, and in a PC where you dont have a GPU that requires dedicated PCIE power cables, you might have the space for the hard drive bay in the bottom. For a budget case, you get a clear priority of functionality > aesthetics > build quality here, while not sacrificing too much to the point where it becomes a liability. If youre trying to save a bit of money on your case, I can certainly recommend this one.

Wow! This case was better than I expected, I haven’t put together a build in a while and wanted a mid tower sized case. I accidentally saw this in pcpartspicker.com and thought I’d give it a try as NZXT cases were either all sold out or overpriced thanks to everyone being quarantined and building out their own pc’s. It came packaged with enough styrofoam and the glass cover is easily removed. I like that your could easily remove the fan frame for Quick access, also great that it came with two fans. I highly suggest to buy a three pack fan or an AIO. For my purposes, a fan was good enough for ventilation. 10/10 would recommend!

Case was just as described. Very clean and sharp looking, and has a decently premium feel. The only issue was that one of the USB ports on the front panel was warped when I received the product. Tried to slightly bend it back but it’s still non-functional. Slightly disappointed that the port arrived damaged and unusable but the rest of the case is top-notch. Update: I contacted the seller via their website and a representative reached out to arrange a replacement front IO panel. Amazing customer service on their part.

“Budget” they say. Well I say quality!

Originally, I had intended to get the Corsair Crystal 280x, A nice, easy to assemble, and cable manage micro-atx case. However, I found this case right before I was about to order that case, and I am extremely glad I did. -For starters, the price is cheap- 70$ at the time of purchase, which is less than half than the Corsair Crystal 280x. For this price, you get exceptionally high build quality. All panels (all high-quality aluminium and tempered glass) fit perfectly and feel solid, as well as easily attach to the case. It comes with magnetic dust filters for the top and front of the case -Airflow is exceptional, and exhaust/intake restrictions are very little/none. My temps have dropped by 2-4 degress since implementing this case compared to my previous case (using corsair fans, not the stock fans). I had to mount my 240mm radiator for my AIO at the front of the case, as I could not get my fans and radiator to clear my RAM when mounting at the top. Even then, this likely varies from motherboard to motherboard. -The size! Its incredibly small, while maintaining easy part compatiblity (Ive seen builds with 3080s fitting, no problem) Its still very easy to build in as long as you use a modular PSU, and you should. Its about the same height as other micro-atx cases, but much thinner. It having a basement certainly helps with the cable management. At the end of the day, I would reccoment this case for anyone building a Micro-ATX system, Id even go as far to say this is the best bang-for-the-buck case option, maybe even the best in general. In Short: -Amazing Price -Looks Great -High Quality Build -Easy to Build in with Modular PSU -Fits most GPUs -Just get it

Ive purchased Lian Li in the past and theyve been nothing but exceptional. This is case is so close but there are a few issues I have with it. 1. The motherboard mounting posts and screws didnt fit together. The posts screwed into the case just fine, but when I tried to secure the board, the screws didnt fit. Luckily I hoard old computer parts and bits and had a bunch of old ones that fit. They werent black, but you wont see the posts beneath the mobo, really. 2. Not a huge issue, but I dont see how one can mount an 240mm aio (all in one) cpu cooler to the top. The motherboard heat sinks dont seem to clear it. However it will mount to the front of the case. My aio cooler is EVGA CLC 240mm All-In-One RGB LED CPU Liquid Cooler. Outside of that I love the case, its mATX and can fit miniITX if thats your thing. Plenty of clearance for a gpu (I have a 3070.) Fits a regular sized PSU. A good clean look for a modern build.

This case honestly is the best bang for the buck case on Amazon, the airflow is excellent, there’s plenty of room for hdd and ssds, the powder coat is pretty high quality for the money, the construction quality is better than expected, better than most NZXT cases I’ve worked on, it comes with blacked out screws for everything you need (not a common with cheaper cases), I’m very happy with the style and thermal temps with this case

this is an amazing budget tower case. i had been looking at the corsair tower case for my build but went for this one instead and it’s been amazing and does its job. only reason i give this 4 stars instead of five is because my glass panel had shattered into pieces when i had tried to take it off a couple weeks after i finished building my pc. it was relatively easy to find a replacement panel but it really bummed me out

Good quality case with plenty of room for cable management and easy to build in. PC case was purchased used like new from Amazon and came with a slight tear in one of the rubber grommets, but Lian Li support was excellent and sent 2 new grommets to me free of charge. Very good case and quite impressed with the support from Lian Li.

I love the size of this case. Its perfect. The build quality is very good and it makes installing fans a breeze. This case is setup very user friendly so customization of it is fun and easily done. The top panel comes off for a radiator or fans and easily mounts back on with one screw and slide ins. The front comes off the case as well. When my case arrived I went to take the glass panel off and accidentally dropped it on my table and it shattered. Since I had been waiting to build this pc until all my parts came I was very disappointed and did not want to send the case back to amazon and wait for replacement. I went to Lian Lis website and messaged customer service and included a picture of my broken glass panel. They quickly responded and sent me a brand new glass panel from China in a week for free! Their customer service cannot be beat. I will purchase Lian Li products again.