Medium Berkey Base Stainless Steel Stand Raises Your Big Berkey Water Filter System 6 Above Countertop for Easier Dispensing of Filtered Water

The Berkey stand was the perfect size and height and made the situation much easier. The height of the stand gave me the ability to place a glass, cup and even a stove-top water kettle underneath the faucet. Before I got the stand, the Berkey was over the sink counter top and the spout was over the sink. Containers had to filled while in the top half of the sink. The water kettle didnt fit in the sink so I had to maneuver to place water directly in kettle. I didnt want a two-step process to enter water in the kettle. And now only one step and very convenient to use with the height of the Berkey stand.

I am so happy that I decided to purchase this stand to go under my Alexapro water filtration system because it allows me to place my water cup underneath the spout effortlessly to get a drink of water.

It is a stand for your Berkey. Lets you get a cup under the spigot if it is on a counter or table top rather than hanging off an edge. I really suggest it if you are planning for your Berkey to overhand a sink, since this keeps the spigot further from the sinks splash zone. Trust me, if your Berk is next to your sick you will see from the splashes water spotting the stainless that you do throw up a good deal of water (often distasteful stuff floating in a used dish).

The stand is great and sturdy but I wish it was about 2 inches taller to fit a full glass underneath without having to hold it at a tilt. I have it sitting on top of my single cup drawer dispenser pods and it raises it just enough to fit the full glass as you can see but it would be nice if I didn’t have to do that.

It does the job well although I wish it was a bit sturdier. Extremely Expensive. Not worth it. I would suggest finding a different item that does the same job.

Product works well but arrived with a broken support. I DID NOT RETURN IT AS IT WAS TOO MUCH HASSLE. Kept it and it appears to be OK with out the support.

A great product and necessary for the Berkey if you are putting it at the edge of a sink, counter or something similar. A nice looking product. Only downside is I am short, Berkey on a counter, on the stand, so....I cant reach the top.

This stand is used for the Berkey small unit. It makes it easier to get to the spigot

The Big Berkey water purification system works entirely by gravity. Gravity fills the purified water container, and gravity empties it via a spigot at the bottom of the reservoir of purified water. The problem is that, in order to fill a standard-sized drinking glass, the Big Berkey must either be placed at the edge of a shelf or countertop, or it must placed on a stand. This stainless steel stand neatly solves this problem. We were afraid that, once on the stand, the Berkey might be top heavy and unstable. However, this is definitely not the case. Our large drinking glasses can easily be filled with purified water, and the Berkey seems just as stable as it was when it was sitting directly on the countertop.

Holds our Burkey just like its supposed to. Its really expensive for what it is though.