Mounting Dream TV Wall Mount for 32-65 Inch TV, TV Mount with Swivel and Tilt, Full Motion TV Bracket with Articulating Dual Arms, Fits 16inch Studs, Max VESA 400X400 mm, 99lbs, MD2380

Bought this mount for our house . Extremely easy to install with the template provided . It exactly as described .

It didnt really come with instructions, you have to watch videos. The marks are designed for 16 spaced studs while mine were 14 so just used different holes. While its nearly impossible to get the little blue level set on the sheet perfectly, keep in mind that the TV itself will be adjusted after, so close is good enough. Mounting the rails to the TV was a bit difficult as my TCL is designed with the fat part at the bottom and the spacing wasnt perfect. I was able to use a combination of the included screws and spacers to make it work well enough. Theres no inherent cable guide pathings but it does come with 3 thin hook-and-look cable ties to help. All in all, I was able to get it mounted just fine solo but if you have friends, get one to help hold it against the wall while mounting. They also included a small level with verticle, horizontal, and 45-degree levels as well as being magnetic. Made with cheap plastic but still a nice bonus. Have not tested the included HDMI cable but it still saves having to buy extras. While I do not intend to use the range of motion, it is pretty easy to use and move around but make sure your fingers are clear or they will get pinched. Also, do not forget that it is recommended to mount it to studs. There exist YouTube videos showing people using heavy-duty drywall anchors and while it may work, I really wouldnt recommend it.

I was skeptical about all the 5-star reviews but this is the real deal. It was the easiest wall mount I ever installed, and it is still holding up strong considering the crazy price. In my opinion there is no reason to spend like five times as much on one of the overpriced mounts they sell in electronic stores. It has a great cutout that you put up on the wall to mark where the screws will go, then you screw it into the wall and attach the TV to it. I will admit that the quality of the materials is slightly worse than what you would get with a super premium mount. The main difference that I observed is the moving arm needs to be adjusted to how you like it so it isnt too hard/too loose to move around where as some premium mounts just move in a super smooth way without any tinkering. I tend not to move my TV around that much even though I like having the option but it seems like if you move it around a lot you may have to adjust the arm occasionally. Other than that, the materials seem great. The metal is sturdy and the TV is held very securely with no give/bending when you move it.

Mounting Dream MD2380 TV Wall Mount Bracket with Full Motion Dual Articulating Arm for most of 26-55 Inches LED, LCD and Plasma TVs up to VESA 400x400mm and 99 lbs with Tilt, Swivel, and Rotation by Mounting Dream is really a wonderful TV Wall Mount. My husband and I hung the bracket onto the wall with the stencil that comes in the box for measuring with the distance between your studs. This took about 15 minutes just measuring and making sure we were exactly where we wanted to place the bolts. Made double sure we were on studs before drilling. The packaging came with plenty of extra parts for any screw size that you may possible need to use to attach your brackets onto the back of your TV. I have a 55 inch LG Ultra HD. It weighs about 50 lbs. I dont notice any issues with the Mounting Dream MD2380 TV Wall Mounting Bracket by Mounting Dream. We feel like our TV is completely safe hanging from the wall on this wall mount. *Mounting Bracket for wall is easily hung when using the stencil that is provided in your kit *Taping the stencil to the wall is easy using the level provided *Once Mounting Bracket is on the wall its easy to check to make sure its level by using the level provided and there is a small amount of moving room to adjust this if you loosen your screws from the wall just a few turns *Brackets are easy to attach to the back of your TV. I did mine myself. Our TV was standing up and this gave me easy access. *There are plenty of screws provided in the kit to allow you to fit your TV with the hanging brackets *Takes 2 people to hang TV if its large like ours. 55 50lbs *Once brackets are on its super easy to tighten them into place *Tilting the TV forward is a little tricky if you unscrew too many turns with the allen wrench provided. You really only need to loosen a couple turns then move TV and retighten. This does work great. TV holds in place as well. *Comes with a really nice 6 ft HDMI cable *Comes with 3 nice Velcro ties for wires Im very happy with our Mounting Dream MD2380 TV Wall Mount Bracket with Full Motion Dual Articulating Arm for most of 26-55 Inches LED, LCD and Plasma TVs up to VESA 400x400mm and 99 lbs with Tilt, Swivel, and Rotation by Mounting Dream. Seems to be made a durable steel. Pleased with parts that were given in kit to make sure everything fit. I would recommend this product most definitely. I would buy it again if the need arose for another TV Wall Mount in another room

This has to be the best bargain out there for wall mounting a heavy TV. I needed and strong wall mount for an old Viso I have and this fit the bill. Itll fasten to almost any TV new or old and is super strong. Very well made and you get everything you need to install it, aside from tools. I was expecting to spend hours installing it but it only took about 30 minutes. You get a wall templett that sticks to the wall and it fits perfect on 16 centered wall studs. Level it and mark the holes. They even give you a level for squaring it off. Drill holes, bolt up the bracket, and put the brackets on the TV. Then just install the TV the mount and youre done. Ive seen $150 units that arent as good as this one. Very pleased and would recommend.

Not easy to install because of weight and bulk. But an excellent product. Sturdy. Good price. Recommend this!

This helps so much my room looks so much better with this. And looks amazing!!!

This was my first time wall mounting a TV and things could not have been any easier. I will be buying this same mount when it comes time for the next TV. It comes with a fool proof template that guides you through the hole drilling steps so someone with limited to no experience mounting TVs can handle this. I did not plan on this but it was a great mistake, I mounted my TV above a fireplace. The part where this mount came in handy is that my studs above the fireplace were not directly centered so being able to move the TV left/right allowed me to have the actual mount itself not centered but I can adjust it so that my TV is centered with the fireplace. The ability to move the TV in and out from the wall is nice when it comes to adding/changing any cords that need to get plugged in. The amount of angle that can be easily adjusted makes it nice for higher TV mounts. I currently have a 55in Samsung and it went up with no problems. The HDMI cord is a nice bonus but does not make/break the rating for this. I read multiple reviews not to trust the small levels that come with I double checked them with my own level and they were just as accurate. From the template to the actual hanging of the TV the directions were simple and clear enough that someone with no experience like myself can still get the job done.

Perfect fit for my 55 Samsung KS8000. The Samsungs bolt pattern is VESA 16x16, which is the limit on this TV mount. It fit perfectly. It just took me about 10 minutes to figure out which combination of spacers and washers to use beneath the TV and brackets. This kit comes with a neat template you can tape to your wall (comes with 3M strips) to help you drill out the hole pattern. It also includes two bubble levels. The smaller you stick on the template, the other is magnetic and helps you level the mount during and after installation (especially useful when youre making final adjustments). The tilting and rotating is great, but does require a bit of force to move the TV. I have to be careful when rotating, pushing and pulling my super-thin TV. But the mount is top-notch and is made from quality materials. You wont be dissapointed! Just make sure to first check your stud spacing. Mine were 16 apart, which is what this kit is designed for. If yours are spaced differently, you can get the adjustable version or buy the add-on bracket if youd like to offset the mount from your stud locations. I appreciate the bolt heads being hexagonal so you dont strip them with a screwdriver (use a socket wrench instead). Took me 40min total and I worked alone. Id recommend having a 2nd person to lift the TV up and onto the mount, and to hold the TV when you undo the nuts in the rear while making final leveling/rotating adjustments. Once you undo the nuts, gravity quickly takes over and its not easy to get it to stay in place while re-torquing the nuts.

Super deal on a swivel mount for heavier TVs. This mount exceeded my expectations for the price I paid for it. It can nicely packaged with everything you would need to install the mount on any type of wall, also came with tons of hardware and spacers to fit almost every TV. Most of it came pre assembled took maybe 15 minutes to complete the entire job. So I purchased this mount to hang a Panasonic 50 plasma TV that weight 75lbs. I was nervous at first be cause the TV weighed so much didnt know for sure the mount would hold and be able to articulate and hold its position the way I needed it to. Well Once the mount arrived and unpacked it I saw that this thing was build very well and I had zero problems what so ever. Just get it mounted, then mount the TV adjust to the position you want it and tighten everything down. Highly recommend this mount to anyone even if you dont thing you need the swivel and tilt I would still get it as it makes cleaning and getting to connections a breeze being able to pull it out from the wall to access the back of the TV.