Nabob Deals Arctic Silver 5 Thermal Cooling Compound Paste 3.5g Heatsink Paste High-Density Polysynthetic Silver with Bonus Tool (Arctic Silver with Bonus Tool)
-
A. A. Hawes
> 24 hourI found a tiny package of thermal compound sent with the fan I order but I didnt use it because I have used and continue to use artic silver. It always does the job
-
David Chaparro
> 24 hourProducto de buena calidad. Recomendado
-
afraz mohammed aqib
> 24 hourUsing it on both of my PC
-
Richard Moore
> 24 hourDoes what it says on the can. And arrived promptly.
-
Trista Nicole Eidsmoe
> 24 hourMy husband loves this stuff, hes been using it for years and building pcs his whole life. Best bang for your buck you could ask for
-
John R.
> 24 hourArctic Silver still the best thermal compound. Easy to add to a Ryzen CPU. Squirted about a rice grain size in the middle and used the plastic tool to spread for full coverage. Simple and easy.
-
Sharon K Hornback
> 24 hourThis is the best thermal paste I have used I have used this stuff for years
-
Tirso
> 24 hourEasy to apply
-
Leaf F.
> 24 hourWorked well! CPU is keeping cool :)
-
Dude
> 24 hourI was trying to fix a heat sink and that was too little product that you could barely spread on one item.
Performance
3 to 12 degrees centigrade lower CPU full load core temperatures than standard thermal compounds or thermal pads when measured with a calibrated thermal diode imbedded in the CPU core.
Coverage Area: A 3.5 gram syringe contains enough compound to cover at least 15 to 25 small CPU cores, or 6 to 10 large CPU cores, or 2 to 5 heat plates. At a layer 0.003" thick, the 3.5 gram syringe will cover approximately 16 square inches
Arctic Silver Thermal Cooling Compound Paste 3.5g High-Density Polysynthetic Silver
Arctic Silver 5 does not contain any silicone. The suspension fluid is a proprietary mixture of advanced polysynthetic oils that work together to provide three distinctive functional phases. As it comes from the syringe, Arctic Silver 5"s consistency is engineered for easy application. During the CPU"s initial use, the compound thins out to enhance the filling of the microscopic valleys and ensure the best physical contact between the heatsink and the CPU core. Then the compound thickens slightly over the next 50 to 200 hours of use to its final consistency designed for long-term stability. (This should not be confused with conventional phase change pads that are pre-attached to many heatsinks. Those pads melt each time they get hot then re-solidify when they cool.
The viscosity changes that Arctic Silver 5 goes through are much more subtle and ultimately much more effective.)
|
|
|
|
|
|
|---|---|---|---|---|---|
| Arctic Silver 2 Pack + Tool | Arctic Silver + Arctic Clean & Cloth | Arctic Silver + Pad/Tool & Cloth | Arctic Silver + Tool & pad | Arctic Silver Starter Kit | |
| Package Contents | Arctic Silver x2 With Tool | Arctic Silver + Arctic Clean & Cloth | Arctic Silver + Pad/Tool & Cloth | Arctic Silver + Tool & pad | Arctic Silver + Cloth + Static Kit |
