Noctua NF-A14 iPPC-2000 PWM, Heavy Duty Cooling Fan, 4-Pin, 2000 RPM (140mm, Black)
-
Dell Stracke II
11-06-2025Great, quiet fan. Great when used on a radiator.
-
Adgg5
> 3 dayIf goes at full speed you can still heard it, but on low speed barely can heard it
-
J. Johnson
> 3 dayThe product arrived promptly. It was packaged very well. I received exactly what I requested and every one of them have worked precisely as expected. I would buy again, when/if the need arises. Thank you.
-
PrimeMomHero
> 3 dayExcellent power not loud at all.
-
quinton
09-06-2025I believe the majority of reviews complaining about them being loud are over exaggerating, far to sensitive to even the slightest amount of fan noise coming from their pc, or dont know how to set a proper fan curve so they dont run at full blast 24/7. I bought 6 of these for my airflow case and are all running around the same speeds on a custom fan curve to keep my pc as cool as possible and only going slightly higher under load and it doesnt bother me at all sitting on my desk next to me. Yes they can get loud up to 2000rpm but should not be the case since they cool so well unless you have a bad case with with bad airflow.
-
James T. May
> 3 dayworks great came on time
-
Tanner N.
> 3 dayPaired with my corsair h110i it made a huge difference in performance and a lot quieter. I should of done this much sooner.
-
Atheris
> 3 dayDelightfully quiet, and the built in vibration dampening pads are a nice feature. I use them with the NA-SAV2 kit for additional vibration isolation (and better mounting vs screws).
-
Jesse Smith
> 3 dayCan be a bit noisy on default settings but it did drop the systems temps by over 10 degrees overall
-
David P.
> 3 dayquite a good fan
Conceived for industrial heavy duty applications that require enhanced cooling performance and advanced ingress protection, the NF-A14 industrialPPC (Protected Performance Cooling) is a ruggedised high-speed version of the retail model. Thanks to the outstanding aerodynamic efficiency of the NF-A14 design and the use of a novel three-phase motor, the industrialPPC version provides superior airflow and pressure capacity while keeping noise levels and power consumption moderate as against comparable high-speed fans. While its fibre-glass reinforced polyamide construction and certified water and dust protection make the NF-A14 industrialPPC suitable for operation in challenging environments, the renowned SSO2 bearing technology ensures an MTTF of over 150.000hrs. Topped off with Noctua’s trusted reliability, the NF-A14 industrialPPC is an ideal choice for highly demanding applications that require superior flow rates and ultimate dependability.
AAO frame
Noctua"s AAO (Advanced Acoustic Optimisation) frames feature integrated anti-vibration pads as well as Noctua"s proprietary Stepped Inlet Design and Inner Surface Microstructures, both of which further refine the fan"s performance/noise efficiency.
|
|
|
|
|
|---|---|---|---|
2000rpm industrialPPC versionThanks to its elevated 2000rpm top speed, the NF-A14 industrialPPC-2000 provides a significant performance boost over the 1500rpm retail version. Combined with the industrialPPC series" robust polyamide construction and advanced protection features, this makes the fan ideal for challenging industrial applications. |
Three-phase motor designWhile most axial fans use single-phase motors with 4 slots, Noctua"s industrialPPC fans feature a three-phase design with 6 slots, which provides smoother transitions between the slots and thus allows for even higher running smoothness, further reduced vibrations and unprecedented energy efficiency. |
IP52 water- and dust protectionThanks to a special varnish coating that covers the motor and PCB, the NF-A14 industrialPPC complies with the ingress protection rating IP52. This means that it is not only highly dust resistant but also withstands dripping water equivalent to 3mm rainfall per minute. |
Fibre-glass reinforced polyamide constructionBoth the impeller and the frame of Noctua’s industrialPPC fans are made entirely from fibre-glass reinforced polyamide. This material can withstand temperatures up to 140°C and makes the fans even more robust and break-proof than Noctua’s standard fibre-glass reinforced PBT fans. |
Please Note:
The industrialPPC models are high-speed fans for industrial applications. As such, they are not as quiet as other Noctua fans and less suited for low-noise PC builds.
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| NF-A14 industrialPPC-2000 | NF-A14 industrialPPC-2000 PWM | NF-A14 industrialPPC-2000 IP67 PWM | NF-A14 industrialPPC-3000 PWM | NF-A14 industrialPPC-24V-2000 Q100 IP67 PWM | NF-A14 industrialPPC-24V-3000 Q100 IP67 PWM | |
| Connector | 3-Pin | 4-pin PWM | 4-pin PWM | 4-pin PWM | 4-pin PWM | 4-pin PWM |
| Voltage | 12V | 12V | 12V | 12V | 24V | 24V |
| RPM | 2000 | Max: 2000 / Min: 500 | Max: 2000 / Min: 500 | Max: 3000 / Min: 800 | Max: 2000 / Min: 500 | Max: 3000 / Min: 800 |
| Acoustical Noise | 31,5 dB(A) | 31,5 dB(A) | 31,5 dB(A) | 41,3 dB(A) | 31,5 dB(A) | 41,3 dB(A) |
| Static pressure | 4,18 mm H₂O | 4,18 mm H₂O | 4,18 mm H₂O | 6,58 mm H₂O | 4,18 mm H₂O | 6,58 mm H₂O |
| Airflow | 182,5 m³/h | 182,5 m³/h | 182,5 m³/h | 269,3 m³/h | 182,5 m³/h | 269,3 m³/h |
| Ingress Protection Rating | IP52 | IP52 | IP67 | IP52 | IP67 | IP67 |
| AEC-Q100 Qualification | X | X | X | X | ✓ | ✓ |
| Size | 140x140x25 mm | 140x140x25 mm | 140x140x25 mm | 140x140x25 mm | 140x140x25 mm | 140x140x25 mm |