Noctua NF-A14 iPPC-2000 PWM, Heavy Duty Cooling Fan, 4-Pin, 2000 RPM (140mm, Black)
-
80CJ5
> 3 daythis thing moves some air. i have had zero issues with these fans.
-
Randy S.
> 3 dayIts a fan, it blows air. These are higher RPM fans so they can get loud. At low speeds, they are quiet. Personally, I will deal with a little noise if it means that my system will stay nice and cool when I am doing video conversion, etc.
-
Paul
Greater than one weekCrappy design
-
Hu Fengjie
> 3 dayVery quiet
-
Prof. Eugenia Terry Sr.
Greater than one weekGood price and good power
-
Igor
> 3 dayGot 3 fans delivered and all 3 of them are covered in dirt and glue, clearly used. The packaging wasn’t even that bad so I’m confused as to how these even were shipped as new product. I submitted for replacement fans and if the next ones that are delivered are clean I’ll change my review.
-
Bob Bourgoin
> 3 dayfast quiet
-
Chad E Dewey
Greater than one weekFans are of good quality and Value for the money. Fans do not slow down, even when using PWM function in Bios 1200 lowest they go and have lots of wind noise fans do not run slow enough to hear any bearing noise or rattling just air noise..
-
Sibble
> 3 dayThey move a lot of air. The noise isn’t motor whine or misbalanced blades, but the whoosh of a lot of air moving. Cool things off more than a Noctua 200mm fan it replaced. They get LOUD at high speed, but even at a quieter lower speed they do well. I like to have them set where they really spin up at certain temps so I know things are getting hot before things get too hot.
-
Antonio G.
> 3 daynormal
Conceived for industrial heavy duty applications that require enhanced cooling performance and advanced ingress protection, the NF-A14 industrialPPC (Protected Performance Cooling) is a ruggedised high-speed version of the retail model. Thanks to the outstanding aerodynamic efficiency of the NF-A14 design and the use of a novel three-phase motor, the industrialPPC version provides superior airflow and pressure capacity while keeping noise levels and power consumption moderate as against comparable high-speed fans. While its fibre-glass reinforced polyamide construction and certified water and dust protection make the NF-A14 industrialPPC suitable for operation in challenging environments, the renowned SSO2 bearing technology ensures an MTTF of over 150.000hrs. Topped off with Noctua’s trusted reliability, the NF-A14 industrialPPC is an ideal choice for highly demanding applications that require superior flow rates and ultimate dependability.
AAO frame
Noctua"s AAO (Advanced Acoustic Optimisation) frames feature integrated anti-vibration pads as well as Noctua"s proprietary Stepped Inlet Design and Inner Surface Microstructures, both of which further refine the fan"s performance/noise efficiency.
|
|
|
|
|
|---|---|---|---|
2000rpm industrialPPC versionThanks to its elevated 2000rpm top speed, the NF-A14 industrialPPC-2000 provides a significant performance boost over the 1500rpm retail version. Combined with the industrialPPC series" robust polyamide construction and advanced protection features, this makes the fan ideal for challenging industrial applications. |
Three-phase motor designWhile most axial fans use single-phase motors with 4 slots, Noctua"s industrialPPC fans feature a three-phase design with 6 slots, which provides smoother transitions between the slots and thus allows for even higher running smoothness, further reduced vibrations and unprecedented energy efficiency. |
IP52 water- and dust protectionThanks to a special varnish coating that covers the motor and PCB, the NF-A14 industrialPPC complies with the ingress protection rating IP52. This means that it is not only highly dust resistant but also withstands dripping water equivalent to 3mm rainfall per minute. |
Fibre-glass reinforced polyamide constructionBoth the impeller and the frame of Noctua’s industrialPPC fans are made entirely from fibre-glass reinforced polyamide. This material can withstand temperatures up to 140°C and makes the fans even more robust and break-proof than Noctua’s standard fibre-glass reinforced PBT fans. |
Please Note:
The industrialPPC models are high-speed fans for industrial applications. As such, they are not as quiet as other Noctua fans and less suited for low-noise PC builds.
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| NF-A14 industrialPPC-2000 | NF-A14 industrialPPC-2000 PWM | NF-A14 industrialPPC-2000 IP67 PWM | NF-A14 industrialPPC-3000 PWM | NF-A14 industrialPPC-24V-2000 Q100 IP67 PWM | NF-A14 industrialPPC-24V-3000 Q100 IP67 PWM | |
| Connector | 3-Pin | 4-pin PWM | 4-pin PWM | 4-pin PWM | 4-pin PWM | 4-pin PWM |
| Voltage | 12V | 12V | 12V | 12V | 24V | 24V |
| RPM | 2000 | Max: 2000 / Min: 500 | Max: 2000 / Min: 500 | Max: 3000 / Min: 800 | Max: 2000 / Min: 500 | Max: 3000 / Min: 800 |
| Acoustical Noise | 31,5 dB(A) | 31,5 dB(A) | 31,5 dB(A) | 41,3 dB(A) | 31,5 dB(A) | 41,3 dB(A) |
| Static pressure | 4,18 mm H₂O | 4,18 mm H₂O | 4,18 mm H₂O | 6,58 mm H₂O | 4,18 mm H₂O | 6,58 mm H₂O |
| Airflow | 182,5 m³/h | 182,5 m³/h | 182,5 m³/h | 269,3 m³/h | 182,5 m³/h | 269,3 m³/h |
| Ingress Protection Rating | IP52 | IP52 | IP67 | IP52 | IP67 | IP67 |
| AEC-Q100 Qualification | X | X | X | X | ✓ | ✓ |
| Size | 140x140x25 mm | 140x140x25 mm | 140x140x25 mm | 140x140x25 mm | 140x140x25 mm | 140x140x25 mm |