Noctua NH-C14S, Premium CPU Cooler with NF-A14 PWM 140mm Fan (Brown)

(358 reviews)

Price
$67.16

Quantity
(10000 available )

Total Price
Share
186 Ratings
151
21
5
5
4
Reviews
  • unfulfilled techie

    > 3 day

    This cpu cooler is extremely huge

  • 空飛ぶ髭剃り

    Greater than one week

    値段がかなり高いですがnoctuaらしく美しく高性能のヒートシンクで所有欲が満たされます。

  • Eric

    > 3 day

    Very quiet, inaudible from more than 2 feet at idle, and temps are very low. Used in HTPC with fan blowing up from below heatsink, the draft probably helps cool the memory because the fan is right above it.

  • Andrew

    > 3 day

    On par with my corsair h150i pro for performance at 1000 rpm, and the corsair had 3 fans + a pump, and the pump is a very whiney frequency. At less than half the price of the h150i pro, the c14s is a great buy. If your case doesnt have side panel vents, make sure to put the fan on the bottom so you dont choke the airflow by having the fan right up against the glass.

  • lance liu

    Greater than one week

    Didnt come with alternative mounting kit for AMD. You can only mount it horizontally.

  • Reviewer 747

    > 3 day

    Not good enough for a i9 13900K, as the temperature spike uncomfortably high and the fans keep on spinning too fast with every other effort by the CPU, but very compact and probably great with processors that produce less heat. Go for the NH-D15 if you have a power hungry 13th gen top processor, those are up to the task in a well ventilated case.

  • Prime

    > 3 day

    Using this on an ASUS Z170i mini itx board with (2) 16GB Trident Z DDR-3000 ram. I did not know for sure if the fan would fit on the bottom of the heatsink as I had it installed on top originally, so I unclipped it and slid it in on the bottom and it fit. I am using a EVGA GTX 1070 ACX3.0 and the heatsink fins on the Noctua NH-C14S are the same height as the video card now. I have the fan blowing downwards so it cools the components on the motherboard as well. I did loose a little performance by having the fan pull air through the heatsink vents instead of push, but not much. I am running a i7-6700K at 4.68Ghz with voltage at 1.31. Right now the idle temp is 23 Celsius and ambient temp in house is 67 Fahrenheit (19.44 Celsius). Fan is super silent and super high quality. Under load (Cinebench CPU test) I am at around 73 Celsius. If you are looking for the best quality unit...this is it.

  • フランシス

    > 3 day

    Works great in a SFF case.

  • Michael Montagne

    Greater than one week

    A principal object of this review is to provide the seemingly neclected Dell user with a relatively comprehensive path and projected success in resolving the regular and even dangerous overheating issues which so many of us experience with standard CPU coolers and multi-core processors.

  • Polymath

    > 3 day

    You cant go wrong with Noctua. I bought this when I converted my old PC into a NAS and the original water cooler was end of life after 8 years! The Noctua seems to keep the temps about the same as the water cooler did. I have a big fan controller on the front and I can see the temps all the time so I know if its getting hot, which it does not. My ambient temps are around 75 max and the CPU is always below 30C, no O/C and running freenas OS. Fan is quiet but not completely silent, gets only a little louder when the fan controller kicks it into high. Still not bad. The case fans are louder.

NH-C14S HeaderNH-C14S Header

Successor to the award-winning NH-C14, the NH-C14S is an elite class top-flow CPU cooler that is extremely efficient, highly compatible and remarkably adjustable. Thanks to its deeper fin stack and the renowned NF-A14 PWM fan, the single fan NH-C14S provides similar quiet cooling performance to its dual fan predecessor while being even more versatile: With the fan installed on top of the fins, the cooler is compatible with RAM modules of up to 70mm height. With the fan installed underneath the fins, the total height of the cooler is only 115mm, making it suitable for use in many HTPC cases. At the same time, the new offset layout allows it to clear the top PCIe slot on most µATX and ATX motherboards. Topped off with the trusted, pro-grade SecuFirm2 multi-socket mounting system and Noctua’s proven NT-H1 thermal compound, the NH-C14S is a premium quality top-flow solution for the highest demands.

NH-C14S Low-profileNH-C14S Low-profile

NH-C14S High ClearanceNH-C14S High Clearance

NF-A14NF-A14

a14a14

Low Profile Mode

Run with the NF-A14 fan installed underneath the fin stack, the NH-C14S stands only 115mm tall, which is much lower than tower coolers with 140mm or 120mm fans and allows it to fit many desktop style or HTPC cases.

High Clearance Mode

Run with the NF-A14 fan installed on top, the NH-C14S provides extended clearance underneath the fin stack. This way, it is fully compatible with chipset coolers and RAM modules with heat-spreaders of up to 70mm height.

NF-A14 140mm premium fan

Featuring sophisticated aerodynamic optimisations such as Flow Acceleration Channels, the NF-A14 is renowned to be among the best quiet 140mm fans on the market. Combined with the deeper fin stack of the NH-C14S, it allows the cooler to achieve similar performance levels as its dual fan predecessor despite only using a single NF-A14.

NT-H1 thermal compound

Noctua’s much-acclaimed NT-H1 is a pro-grade TIM solution that provides minimum thermal resistance, excellent ease of use and outstanding reliability. Chosen again and again by overclockers and enthusiast users worldwide, it has established itself as a benchmark for premium-quality thermal compounds.

c14c14

C-Type top-flow design

The c-type top-flow design of the NH-C14S not only allows for superb quiet cooling performance while maintaining a much lower profile than today"s 140mm tower-style coolers but also ensures excellent airflow over RAM modules and near-socket motherboard components.

NH-C14SNH-C14S
Measurements
  • Height (without fan): 115 mm
  • Width (without fan): 140 mm
  • Depth (without fan): 163 mm
  • Height (with fan): 115/142 mm
  • Width (with fan): 140 mm
  • Depth (with fan): 163 mm
  • Weight (without fan): 820 g
  • Weight (with fan/s): 1015 g
Material

Copper (base and heat-pipes), aluminium (cooling fins), soldered joints & nickel plating

Cooler Specifications

Scope of delivery

  • 1x NF-A14 PWM premium fan
  • Low-Noise Adaptor (L.N.A.)
  • Fan clips for second fan
  • NT-H1 high-grade thermal compound
  • SecuFirm2 Mounting Kit
  • Noctua Metal Case-Badge
Socket compatibility

Intel LGA1700, LGA1200, LGA1156, LGA1155, LGA1151, LGA1150, LGA2066, LGA2011-0, LGA2011-3 (Square ILM) & AMD AM4, AM5

Related products

Shop
Discount Stores
Discount Stores
( 1571 reviews )
Visit Store
Top Selling Products