Noctua NH-D15, Premium CPU Cooler with 2X NF-A15 PWM 140mm Fans (Brown)

(0 Reviews)

Price
$92.36

Quantity
(10000 available )

Total Price
Share
3568 Ratings
3140
260
72
33
63
Reviews
  • Jake W

    > 3 day

    I wrote a review previously and accidentally submitted it before I was done.

  • Marcel

    > 3 day

    Ich habe den CPU-Kühler von Noctua gekauft, um mein Gaming-Setup zu verbessern. Ich war begeistert von der Leistung und den Funktionen dieses Kühlers und ich muss sagen, dass er meine Erwartungen übertroffen hat.

  • The G4mer

    > 3 day

    Went from 70s and 80s not my 8350 fox to 30s and 40s. I was always on the wall about these giant air coolers but theyre definitely worth it. If you dont have the room in your case however I would still recommend an AIO cooler. This thing is massive. Ive installed 2 so far in 2 different cases and had to remove the side panel fans because they were interfering with the cooler.

  • Jonathan

    > 3 day

    This cooler is a BEAST! The packaging is premium, I could tell this was a great value buy as soon as it arrived. Unboxing was a pleasure, the kit is very well made and everything connected flawlessly. I checked the measurements prior to purchase and was not let down - everything fit with a few mm to spare. As for how the cooler functions - I was able to squeeze an additional 300mhz out of my cpu and still keep it under 80c when fully loaded in prime95. Delidding is now my next step to see how much more I can get from this chipset. Once the load dropped, this beast shed over 50c off the temps in under a second! My buddy and I were reduced to tears and laughter at how amazing this cooler setup is. 10/10 will only go with Noctua from here on out. Will update in the future if the status changes but I dont expect this thing to fail.

  • Stefano

    > 3 day

    Un capolavoro della dissipazione, un gioiello austriaco che tutti dovrebbero avere nei propri pc, spazio e portafoglio permettendo.

  • kevin terry

    > 3 day

    Easy to install, performs as well as my old 240 AIO, and even comes with a tube of noctuas N1 H1 paste.

  • Yann

    > 3 day

    That huge thing can keep my cpu at 4c over room temperature while gaming

  • luis

    > 3 day

    Con el Ryzen 5 1600 que tengo su enfriamiento ha pasado de 70 grados en juegos tipo bf 2042 o bf v o starcraft 2 a 40-50 grados como máximo. Muy bueno en verdad. Ya quisiera que existiera una forma de poder ponerle esto a una tarjeta gráfica. Aunque debo añadir que mi case es de esos con muchos huecos y ahora mismo la temperatura ambiente está a 17 grados. Toca ver en verano que tal, más que todo para esa época lo compré ya que la temperatura ambiente va a los 33 grados y en aquel entonces con el disipador de stock me iba el procesador a 85 grados, toca ver para esas fechas que tan bien disipa este monstruo de torre tan excelente que ya se demuestra ahora. Por cierto, la instalación es relativamente sencilla, solo requiere paciencia y saber inglés, las instrucciones están en inglés. El nivel de ruido es moderado, sé que tiene unos cables para reducir el ruido, pero eso se traduce en forzar que se baje la velocidad (o rpm) de los ventiladores del disipador este y pues, para qué?, si lo que quiero es que la torre se enfríe, por mí que vaya a lo que deba ir. Gracias Amazon por traerme el paquete en poco tiempo, y sobretodo, gracias Noctua por haber diseñado y creado un muy buen disipador. Tecnología alemana, esas no la superarán sino hasta en el 4to reich. xd

  • ぶびび

    > 3 day

    当方、4770kで利用を開始しました。

  • Mason K

    > 3 day

    My AIO watercooler died on my so I was looking for a replacment. Saw this product has great reviews so I ordered it and its been a month and its been fantastic. Wayyyyyyyyyy quieter than my previous AIO cooler and keeps my CPU cool!!!

NH-D15 HeaderNH-D15 Header

Built on the basis of the legendary NH-D14 and carrying on its quest for ultimate quiet cooling performance, Noctua’s flagship model NH-D15 is an elite-class dual tower cooler for the highest demands. Its expanded heatpipe layout and two premium grade NF-A15 140mm fans with PWM support for automatic speed control allow it to further improve the NH-D14’s award-winning efficiency. Topped off with the trusted, pro-grade SecuFirm2 multi-socket mounting system and Noctua’s proven NT-H1 thermal compound, the NH-D15 forms a complete premium quality solution that represents a deluxe choice for overclockers and silent-enthusiasts alike.

NH-D15NH-D15

NH-D15 Single Fan RAMNH-D15 Single Fan RAM

NF-A14 fanNF-A14 fan

NT-H1NT-H1

Widened fin stack and expanded heatpipe layout

Compared to the NH-D14, the NH-D15"s fin-stack has been widened from 140 to 150mm and its heatpipes are now spaced further apart, which allows for a more uniform heat distribution over a larger surface area and thus contributes to the NH-D15"s superior efficiency.

High RAM compatibility in single fan mode

Thanks to its recessed lower fins, the NH-D15 provides 64mm clearance for tall memory heatsinks in single fan mode, making it compatible with most high end RAM modules on the market. In dual fan mode, the NH-D15 should be used with standard height RAM (up to 32mm). In chassis with more than 165mm CPU cooler clearance, the front fan can be moved upwards to make room for memory modules taller than 32mm.

Dual NF-A15 140mm fans

The NH-D15 features two of Noctua"s premium class NF-A15 140mm fans. Complying with Noctua"s AAO standard and featuring sophisticated aerodynamic design measures such as Flow Acceleration Channels, the NF-A15 has quickly built up a reputation as one of the best 140mm fans on the market.

NT-H1 thermal compound

Noctua"s much-acclaimed NT-H1 is a well proven pro-grade TIM solution that provides minimum thermal resistance, excellent ease-of-use and outstanding reliability, which makes it suitable for use in professional server and workstation environments.

NH-D15 specNH-D15 spec
Measurements
  • Height (without fan): 160 mm
  • Width (without fan): 150 mm
  • Depth (without fan): 135 mm
  • Height (with fan): 165 mm
  • Width (with fan): 150 mm
  • Depth (with fan): 161 mm
  • Weight (without fan): 980 g
  • Weight (with fan/s): 1320 g
Materials

Copper (base and heat-pipes), aluminium (cooling fins), soldered joints & nickel plating

Cooler Specifications

Scope of delivery

  • 2x NF-A15 PWM premium fan
  • 2x NA-RC7 Low-Noise Adaptor (L.N.A)
  • NA-YC1 4-pin PWM y-cable
  • NT-H1 high-grade thermal compound
  • SecuFirm2 mounting kit
  • Noctua Metal Case-Badge
Fan compatibility

140x150x25 (with 120mm mounting holes), 140x140x25 (with 120mm mounting holes), 120x120x25

d15d15

6 heatpipe dual tower design

As compared to conventional single tower heatinks, the NH-D15"s fine-tuned six heatpipe dual tower design provides more surface area, better heat-distribution and superior airflow efficiency in dual fan mode.

NH-D15 table NH-D15S table NH-D15 table NH-D15 chromax.black table NH-D15S chromax.black table
NH-D15 NH-D15S NH-D15 SE-AM4 NH-D15 chromax.black NH-D15S chromax.black
LGA2066, LGA2011-0 & LGA2011-3 with NM-i20xx
LGA1700 with NM-i17xx-MP83
LGA1200, LGA115x (LGA1150, LGA1151, LGA1155, LGA1156) with NM-i115x-1200
LGA775 & LGA1366 with NM-I3 with NM-I3 with NM-I3 with NM-I3 with NM-I3
Xeon LGA2011 Narrow ILM / Xeon LGA1366 & LGA1356 X X X X X
Xeon LGA3647 X X X X X
Xeon LGA4189 X X X X X
AM5
AM4
sTRx4, sWRX8, TR4, SP3 X X X X X

Related products

Shop
Kim's Store
Kim's Store
( 0 Reviews )
Visit Store
Top Selling Products