Noctua NH-D15, Premium CPU Cooler with 2X NF-A15 PWM 140mm Fans (Brown)
-
HUBSON47
> 3 dayBest!
-
American cook
> 3 dayNoctua is revered by all DIY project users. I is far too ugly to be found in a prebuilt PC and so is the over the top high quality. Made from insulating over the top expensive plastics over engineered all together. Showing some DIY pride here.
-
svtcontour
Greater than one weekA bit expensive but an Epic cooler!
-
Mike Debany
> 3 daySuper easy to install...
-
Ibrahim Boyer
> 3 dayCPU temps look good 7900x staying under 55c, but the fan quality is... Iffy. They rattle, make weird noises, vibrate, and are just overall not impressive at all, in fact they kind of sound like they could die in a couple months. Maybe I got a bad set.
-
SECforge414
> 3 dayThe best air fan money can buy. Works great with my i8700k rtx 2070 and 32gigs ram. Thanks again!
-
PC
> 3 dayAir cooler di dimensioni generose ma molto silenzioso e affidabile. Consigliato per overclock non estremi. Per il montaggio con piu di una scheda grafica e per la memoria occorre consultare la lista delle motherboard e ram compatibili sul sito del produttore. Consegna estremamente rapida.
-
Grant Easton
> 3 dayGreat product! I (easily) installed this in the non-traditional vertical profile on my Sabertooth Z170 Mark 1 motherboard, and it has been going fine since the install. Idle temps are low, and the operational temps are hardly any higher (just using the 4.2GHZ boost for now from the 6700K). Looking forward to doing some overclocking with this bad boy to see what can really be accomplished!
-
kamloops
> 3 dayVery big so make sure your case will hold it but a class product that works as advertised. The headline says it all.
-
Ben G
> 3 dayUsing with my i7 8700K and I have to say this is an amazing cooler. Temperatures are great under high clock speeds and loads but somehow it always stays quiet. The only downsides are that it can be a pain to get out it in the case, it is so big that it over takes and blocks some RGB, and it is not the easiest install ever (not exceedingly difficult but I wouldnt recommend it for your first build). I would buy this again!
Built on the basis of the legendary NH-D14 and carrying on its quest for ultimate quiet cooling performance, Noctua’s flagship model NH-D15 is an elite-class dual tower cooler for the highest demands. Its expanded heatpipe layout and two premium grade NF-A15 140mm fans with PWM support for automatic speed control allow it to further improve the NH-D14’s award-winning efficiency. Topped off with the trusted, pro-grade SecuFirm2 multi-socket mounting system and Noctua’s proven NT-H1 thermal compound, the NH-D15 forms a complete premium quality solution that represents a deluxe choice for overclockers and silent-enthusiasts alike.
|
|
|
|
|
|---|---|---|---|
Widened fin stack and expanded heatpipe layoutCompared to the NH-D14, the NH-D15"s fin-stack has been widened from 140 to 150mm and its heatpipes are now spaced further apart, which allows for a more uniform heat distribution over a larger surface area and thus contributes to the NH-D15"s superior efficiency. |
High RAM compatibility in single fan modeThanks to its recessed lower fins, the NH-D15 provides 64mm clearance for tall memory heatsinks in single fan mode, making it compatible with most high end RAM modules on the market. In dual fan mode, the NH-D15 should be used with standard height RAM (up to 32mm). In chassis with more than 165mm CPU cooler clearance, the front fan can be moved upwards to make room for memory modules taller than 32mm. |
Dual NF-A15 140mm fansThe NH-D15 features two of Noctua"s premium class NF-A15 140mm fans. Complying with Noctua"s AAO standard and featuring sophisticated aerodynamic design measures such as Flow Acceleration Channels, the NF-A15 has quickly built up a reputation as one of the best 140mm fans on the market. |
NT-H1 thermal compoundNoctua"s much-acclaimed NT-H1 is a well proven pro-grade TIM solution that provides minimum thermal resistance, excellent ease-of-use and outstanding reliability, which makes it suitable for use in professional server and workstation environments. |
Measurements
- Height (without fan): 160 mm
- Width (without fan): 150 mm
- Depth (without fan): 135 mm
- Height (with fan): 165 mm
- Width (with fan): 150 mm
- Depth (with fan): 161 mm
- Weight (without fan): 980 g
- Weight (with fan/s): 1320 g
Materials
Copper (base and heat-pipes), aluminium (cooling fins), soldered joints & nickel plating
Cooler Specifications
Scope of delivery
- 2x NF-A15 PWM premium fan
- 2x NA-RC7 Low-Noise Adaptor (L.N.A)
- NA-YC1 4-pin PWM y-cable
- NT-H1 high-grade thermal compound
- SecuFirm2 mounting kit
- Noctua Metal Case-Badge
Fan compatibility
140x150x25 (with 120mm mounting holes), 140x140x25 (with 120mm mounting holes), 120x120x25
6 heatpipe dual tower design
As compared to conventional single tower heatinks, the NH-D15"s fine-tuned six heatpipe dual tower design provides more surface area, better heat-distribution and superior airflow efficiency in dual fan mode.
|
|
|
|
|
|
|---|---|---|---|---|---|
| NH-D15 | NH-D15S | NH-D15 SE-AM4 | NH-D15 chromax.black | NH-D15S chromax.black | |
| LGA2066, LGA2011-0 & LGA2011-3 | ✓ | ✓ | with NM-i20xx | ✓ | ✓ |
| LGA1700 | ✓ | ✓ | with NM-i17xx-MP83 | ✓ | ✓ |
| LGA1200, LGA115x (LGA1150, LGA1151, LGA1155, LGA1156) | ✓ | ✓ | with NM-i115x-1200 | ✓ | ✓ |
| LGA775 & LGA1366 | with NM-I3 | with NM-I3 | with NM-I3 | with NM-I3 | with NM-I3 |
| Xeon LGA2011 Narrow ILM / Xeon LGA1366 & LGA1356 | X | X | X | X | X |
| Xeon LGA3647 | X | X | X | X | X |
| Xeon LGA4189 | X | X | X | X | X |
| AM5 | ✓ | ✓ | ✓ | ✓ | ✓ |
| AM4 | ✓ | ✓ | ✓ | ✓ | ✓ |
| sTRx4, sWRX8, TR4, SP3 | X | X | X | X | X |
