PowerBridge TWO-CK Dual Outlet Recessed In-Wall Cable Management System with PowerConnect for Wall-Mounted Flat Screen LED, LCD, and Plasma TV’s

Very easy install. works as expected. Decent quality but think price point is a little high.

Worked perfect!! Needed to raise TV so kiddo would leave it alone. This did the trick. Took about 45 min to install. No issues.

This product turned out to be the perfect solution for my wall mounted television in the master bedroom. Our TV is approximately 5ft high on the wall and the AC outlet below was to the left and approx 4ft under the TV. 17 to the right of the existing AC outlet, our wall already had an additional wall plate cover that was covering an empty junction box that had only contained one very old cable, which isnt wired to anything. I believe the home builder in the early 90s probably dropped in a standard cable from that era, for a connection to cable TV. At any rate, that cable was of no use, so I was able to use the existing cut-out hole for the power-in piece of the Power Bridge. Its important to note that the standard junction box cutout was in fact a little larger than the hole that the Power Bridge specs call for. When I held the template up to the hole, I knew this was going to be a little bit tricky. The wall plate on the Power Bridge power-in is just barely large enough to cover the edges of the standard sized hole....and as a result the flanges do not catch and hold the drywall as snug as they do when you cut the proper sized hole. With my custom cut hole up above, for the Power Bridge power-out hole, its perfectly snug and a great fit. Nonetheless, I was able to work with the existing hole and make it look decent. If you were to walk up to it and start tugging on the power cord you could probably toggle the faceplate loose and then youd see the hole behind an edge on the face plate. But alas, we wont be tugging on the cord :-) My only criticism of this product would be the 6ft power cord that you use from your AC outlet to the power-in Power Bridge. I guess for most users this isnt problem at all, as many would likely have a piece of furniture that could conceal the cord and the outlets. For me though, this is a bedroom wall and theres very little room between the foot of our bed and the wall. Definitely not enough room for any furniture, and thus we have need to conceal the cord as best we can. As I mentioned above, the space from our AC outlet to the power-in is only 17, yet the cord is 6ft long. I realize its unrealistic to include multiple lengths of power cord in the box and probably unrealistic to offer options when purchasing, but Id be very curious to know which would be more popular with consumers of this product....a 6ft cord OR maybe a 2ft cord. I would venture to guess that most people are cutting out their power-in hole very close to an AC outlet....like maybe one stud over. But I digress, I was able to buy a white, cord concealer that matches our molding at the bottom of the wall. I stuffed most of the power cord in there and just have it resting on the ground against the molding. It isnt completely ideal, but seems to work okay for us. I apologize for the pictures appearing sideways. Im uploading them with correct orientation, but for some reason theyre rotating once theyve uploaded.

This is the easiest installation Ive ever done of probably anything in my home. The kit was perfectly concise with only three components. I opted to read reviews and watch some Youtube installation tutorials rather than read the instructions first. It looked easy enough. And it was! I did have to buy a drywall saw but duh of course you do. Lol. Other than that, I didnt need anything additional. But he HGMI and audio video cords dont come with it. It works like a charm and my living room looks GREAT!! I ordered a second one before I had even finished setting up the living room! I have an outlet in my master closet that is too high for me to reach. So I plan to use this product in the reverse and create an outlet closer to the floor! Im so glad that I found this! Oh! if you finish installing it and the plate looks weird because its not snug to the wall enough....KEEP SCREWING! Lol! I was the idiot who thought I only had to turn the screw to a 90 degree angle to raise the locking lever in the back. I didnt immediately realize that if you kept screwing it was self-tightening. Smh. Once I figured that out, I was thrilled with my purchase and quickly bought the second.

This is the third time i have installed a power box for a flat screen tv. The product was very well constructed and the design is very eye pleasing. The template that came with the unit was a perfect fit there was not need to trim again after cutting the outline of the box. In previous attempts i have had to cut or trim more of the size for the actual box verses the template when using other brands. I am very well pleased with the power cord connector as it is made very sturdy with a very tight fit. All in all this is the perfect power and cord box for any Tv installation.

This is kind of expensive but it is really easy to install and it looks professionally done. I have this in my living room and you can’t see any cords for the TV. The only thing I would change is the HDMI cord was too short. Buy a nine or 10 foot long one.

On a scale of 1-10 in terms of ease of installation, I rate it a 4. The reason is because my particular situation may not be a straight forward installation because my tv is mounted on the wall, but all the gadgets and entertainment stuff is on shelves on the side of the tv. So, I couldnt just make two holes on the top and bottom and drop the wires down. I had to cut two holes on the left side of the wall and right, then crawl into my 4ft high crawl space to fish the wires through. The quality of the product itself is great, it comes with everything necessary for installation. The only gripe is if you have a lot of wires then you better measure if this fits. But Im glad I purchased it and will do it again if I had to. Pros: Good material Cons: Pricey, poor instructions

Was extremely impressed with this product. Im always uneasy cutting holes in a perfectly good wall, but with the quality of this product, the easy to understand instructions, and a helpful video on the web, I successfully mounted my 50 T.V. on the wall and ran the wires behind the living room wall. Will absolutely buy again for my next T.V. project!

We actually had someone install this that we found off of thumbtack but it seemed pretty easy. Of course it would seem that way when you’re not doing it yourself. We’ve been using this for about a month now and it works well. The packaging was a bit shabby. The box looked used and the items weren’t packaged well but all the parts were there and the actual parts did not looked used.

Dead easy to install and instantly make your mounted TV look classier without wires dropping or a cover on the wall. Wish they were a tad bit cheaper, but in reality, you really only ever need 1-3 of these and it’s not like you need to upgrade them ever. Great product, would easily recommend to anyone mounting a TV.