Radar Detector Hardwire Kit,Direct Wire Wiring kit for Escort Valentine One Uniden Beltronics Cobra Radar Detector Quick Connection Plug and Play Power Cord Cable(13FT RJ11)

Ran in a Subaru Forester for a radar detector. Works perfect...

This worked well to wire my Radar detector in. I had the wires above the windshield and pulled away the weatherstripping to text the wire again how long the drivers door. The fuse tabs were the right size and the fuses that were included worked well.

Good quality product, everything you need and then some. Easy install in 2013 Audi A6. Literally 10 minutes.

I installed this in my E90 yesterday. There are a few such kits out there but this one gives you every common fuse connection type and the most cable length and its still well priced. It also includes a 5A fuse of every size, some replacement inline fuses, a few zip-ties, and even a trim pry tool! For easier cable routing by just tucking it behind some panels / molding without prying on anything, if you have any problem with the cable walking itself out over time, wrap some double-sided tape around it every 6 inches and tuck it back in. Go ahead and ground it first, but dont plug it in til the rest of its installed - dont risk screwing up and popping the one fuse they gave you. My only complaint with this kit is it could use just a few detailed instructions. Obviously it cant tell you how to route it in your vehicle or which fuse slot you should put it in. But it should tell you about the add-a-circuit system they have here: Now it helps if you have a meter on hand to verify the connections. Having done that I found the reason it has two fuse sockets on the connector is because the one closer to the fins is for an existing fuse, and simply lets that fuse sit in the circuit same as before, while tapping one fin to supply voltage to the radar detector through the 5A fuse you add. This way your RD is on its own (fused) circuit, and you dont need an empty fuse socket (although thats still ideal). Just be sure to find a fuse which isnt energized til key-ON! Or accessory if you want. Its your battery, do what you want. I would recommend this kit. I cant believe how long I used the coily cigarette-lighter cable.

Very easy to install. Perfect fit and well built. Works great with my Uniden R7.

I have had two of these and both of them have shorted right at the RJ45 connector and now im out of the return window. Avoid this product.

wired right up! spent a day running errands with it installed and the detector didnt power cycle or shut off on its own.

my friend likes it

Worked perfectly to install a Escort Max into my 17 WRX

This is a fantastic wiring kit. I got a kit a couple years ago and it was terrible with soldering needed and the wire was too short. This wire is plenty long, there’s several different quick connect attachments making install a breeze. This was wonderful. I highly recommend this kit for anyone with a Uniden R1!