Repair Parts Plus for iPad 6 (6th Gen 2018) Screen Replacement Glass Touch Digitizer Premium Kit (9.7, 2018 - A1893 | A1954) + Home Button, Tools, Adhesive - Black

Set up well from the second attempt, removed the rubber frame for camera, added B7000 in corner where the wide cable is, rolled in a layer of kitchen stretch film, and after I used usual clear office sticky tape -several layers, let glue dry 48 hours and removed the film, result is wonderful like factory, after several days using no any blind spots or cracks. I dont have enough experience and couldnt insert web camera rubber frame in holes and just removed the frame. Couldnt put cable ideally and screen didnt completely set and it was 0.5 mm up, but some sticky tape pressure and the glue helped. Not bad for unprofessional guy like me.

The directions were in plain language.

I had bought a cheaper kit and replaced screen on 5th generation easy peesy. I went out on a limb and bought this more expensive kit and it was a flop. Screen all of a sudden has glitches and doesn’t work at all. Big bummer.

Works just fine. Find a good YouTube video to follow when you do the install so you do it correctly.

I installed the screen and after doing so I realized the cámara position was way off. Unfortunately since I removed the adhesive tape to install It I can’t return it.

Purchase the screen installed it and part of the touch sensors did not work in the middle of the screen, had did it exchanged and the replacement product had the same issues now this in multiple locations. Finally just took the device to a local shop and their screen worked perfectly. Such a waste of money

Do your homework and know what your getting into. This kit provides everything you need.

Perfect!

The old screen was difficult to take off because it has shattered so I was taking a lot off in chunks. Suggest having a large surface area to work on and you will need a vacuum afterwards. Don’t try to wipe the LCD screen with glass on it or it will scratch. I could not salvage the built in button so I used the button already on the screen. However, the tools were great and the screen works great. I have my iPad back for a great price. You have to have patience. It also helps to have a magnifying device as the glass bits, screws and connectors are small, at least for me.

This kit provides everything you need to replace a cracked screen. It is very difficult to remove the old screen because the adhesive is strong, and the screen actually sits down in the frame. I used a hair dryer to warm the adhesive, but it took a long time. Also be careful with the connector for the home button. I broke it off of the main board and now the home button is toast. A learning experience for me, and hopefully you heed this warning. On the plus side, the iPad is working and not shedding parts of the cover!