Rokrou Diamond Hole Saw Set 15 PCS Tile Hole Saw Kit with Drill Guide from 6mm-50mm /1/4‘’- 2” for Ceramic,Glass,Porcelain,Marble

The bits are well made and withstood the task at hand which was about 1.5 of solid granite. The odd contraption they include with the bits is honestly a terrible attempt at whatever it is they thought they were solving. It is useless. I just chucked it away. I use a 90 degree portable press to prime my hole and then finish it off by hand with the drill. I wish theyd shave off the price and save us the extra plastic and bearings. Other than that, a great product.

Overall, it worked as I needed it too. Out of the box I wasnt enthusiastic. The product came with a screw driver that extremely rusty. The products screws werent put in well so I thought I broke the product the moment I used it.

This kit worked well for the application. However, we had to buy a specific bit for our job as a 32mm was not included in the set. It seemed to have virtually everything else. I cannot speak to longevity as weve only used it once after we bought the size bit we needed. The suction cup did slip a little but didnt hurt anything.

Great tool. But hopefully last a little bit longer. Still good choice. Thx

Im installing a bathroom in my basement, and the shower is 100% tile, clay tile! I needed to install the water flow/temp control valve so I had to cut a 2 hole in the tile. I figured I could use my roto-zip with a tile/ceramic bit. I was wrong! I burned up 3 bits and only got about 70% of the hole cut. I purchased these cutting bits and they work great! I took the 2 bit and it ate through the tile in 15 seconds. Then I had to cut a 3/4 hole for the shower head, and it zipped through like a champ! I cant speak for longevity, but initial efficacy is outstanding! 10/10 would recommend.

great value for simple projects - not professional grade. perfect for homeowner - USE A SPONGE TO KEEP WET, SLOW AND EASY ON PORCELAIN. 10 holes in porcelain w one bit so far. slow and easy take your time its not wood.

Excelente...

Update: Seller contacted me after the following review and offered to replace or refund. Also, after reading other reviews I would like to add a reminder to always use these with water (if you want them to work for more than 1 hole). That goes for any continuous surface diamond cutter. Keep applying water as cutting surface dries. Water will also help flush out the debris. Great selection of sizes for the price. Dont expect to do cut a lot of holes with any one. Found the diamond coating on the inner surface flacked off on the two larger sizes I used. Handy to have the selection of sizes for the occasional use. The slot for debris removal on the smaller sizes is too small. Kept having to stop and try to clean out the debris, which often got stuck inside when drilling porcelain tile. The 1/4 size lasted for about 11 holes going through 3/8 porcelain, thinset, and hardie board (about an inch thick). Should have invested in a good 1/4 diamond holesaw with large debris flute sooner. Way faster.

Works perfectly. Follow the instructions about low drill speed and plenty of water. Keep it clean and cool and can cut many holes.

Cut through glass exactly as needed. Good tool for the price