Security-01 2Pack 1 to 2 Way DC Power Splitter Cable Barrel Plug 5.5mm x 2.1mm for CCTV Cameras LED Light Strip and More

son lo que deben ser y muy convenientes para coneccion de camaras.

Here’s the issue, the the main cable worked it was able to handle the 10 amp load. But when it splits into the Y they cut the power in half. That’s where it couldn’t handle peak loads and the cable went up in smoke.

I purchased the 1 to 2 splitter December 2019. Current carrying capacity is stated as 5A in and 3A per branch. Wires looked a little small to me at 0.115 and 0.100 OD for the black 2-conductor plus insulation. Cutting one apart and measuring the wires shows 27 and 29AWG wires were used. Ampacity is fairly subjective depending on how theyre used and how hot the wires are allowed to get but I wouldnt recommend these for more than a couple amps total. I ran 1.7A straight through one leg for about an hour and the wires were only a little warm.

Does job as expected. The magnet might not work for surface pro but it has to do with the angle you charge from. Otherwise it’s great.,

Like

Tal como se describe en la página

Described well, good quality

Good quality power cord splitter

These things were great for splitting on video cameras security cameras and such

Using this splitter to power an array of external USB3 from a single DC supply. Seagate drives require a converter from this splitters 5.5mm x 2.1mm male plug to the drives 5.5mm x 2.5mm female jack.