













Shonsin 8 Gauge Silicone Wire Spool 25FT Black, Extremely Flexible 8 AWG Automotive Wire, 1650 Strands 0.08mm Tinned Stranded Copper (8.29mm2) High Temp 392℉/200℃ Rating 65 Amp 600V
-
Dags and Scout
> 3 dayexcellent product Exactly as advertised
-
Joe
> 3 dayUsed to wire up led pods on my atv, no issues do far.
-
H
> 3 dayNeeded some flexible wire, this fit the bill. Really flexible and easy to solder.
-
Ajax Dahgue
> 3 dayBought this to fabricate a Coil On Plug (COP) ignition system for a vintage V4 motorcycle. I needed16ga wire to drive the coils, but was interested in the flexibility advertised because the fabricated harness will have to snake through the bike frame. I was amazed at just how floppidy this wire is. Floppy is just the word. My finished harness had red and black runs through 1/4 braid, and it was like snaking string through the tiny winding openings to go from the spark drive unit to the COP above the cylinders. This is great stuff. The 16ga is easily as flexible as the best 22ga wire Ive used. Highly recommended. I just installed the finished harness last night, and dont have experience to rate durability or heat resistance (connections are crimped). Consider no update here to mean those characteristics are satisfactory - k -
-
MBER
> 3 dayI used this wire for a 50A outlet in the garage to connect an EV charger. This high quality wire may have been an overkill for my install, but it being so super flexible made it so much easier to threat it through the conduit pipe.
-
The Toolman
> 3 dayThis is nice quality wire with super flexible silicone sheathing. Great for hobby projects.
-
Subaru4x4
Greater than one weekArrived on time and as advertised. It works really well for RC battery cables. Tends to be much easier to route and keep out of the way. Good buy!
-
Mike
07-06-2025This wire is very flexible and easy to work with.
-
Wisconsin
Greater than one weekWires fried on my riding lawnmower so I needed to fabricate a new set. This set worked out great since it came in a set for a positive/negative terminal setup. The silicon sleeve is very supple and may be prone to damage. The wires fit nicely on the terminal lugs that I purchased to attached to the lawnmower frame and for the battery terminals. Its been well over a year and the wires have shown no sign of wear. I would purchase these again if I make the stupid mistake of shorting these wires like I did the original ones that came with the rider.
-
Clayton Iler
> 3 dayVery flexible and has high heat resistance great product will use the wire for all my projects