SimbaLux Acrylic Sheet Clear Cast Plexiglass 12” x 12” Square Panel 1/4” Thick (6mm) Transparent Plastic Plexi Glass Board with Protective Paper for Signs, DIY Display Projects, Craft, Easy to Cut
-
D. Koch
> 24 hourThis was, as defined, a piece of 12x12, 1/4 plexi - perfect for what I needed. I was packed in bubble wrap, free of scratches or damage.
-
Robin Guthrie
> 24 hourJust what I needed
-
Allen D. Reinecke
> 24 hourBought a 12 x 12 x 1/4 sheet of acrylic to make new foot plates for my trim router as the original factory foot plate is too basic and its center hole is too large for standard guide bushings to be fitted. The sheet arrived well-packaged in bubble wrap inside a form-fitting box inside a larger Amazon box, which also contained some Forstner drill bits I needed for this project. It measured 1/16th under the 12 inches on both sides. I assume that the original large sheet is marked at exactly 12 inches and the cutting blade running along that line has a width of 1/8. Hence the loss of the 1/16th inch per cut sheet. Not an issue for my project, but would be if someone wanted exactly 12 square. The brown paper protection was ideal for marking out the sheet and it was left in place until all cutting, sanding and drilling was completed. I was able to power sand the acrylic up to the lines on the paper without the paper coming loose or fraying. The acrylic cut cleanly with my table saw (40 TPI), jig-saw and it was center-punched and drilled cleanly on my drill press (1700rpm) without cracking or melting. In conclusion, I do not hesitate to recommend this product.
-
Lora Murphy
> 24 hourThe product was exactly as described.
-
Lily
> 24 hourI ordered the black version of this sheet, its definitely pitch black and very sleek~ It feels bad calling this a mere sheet, it is quite thick but not to the point where its heavy (held in my hand). It needed to be cut and rendered into a palette that wouldnt bite of course, and the process was nice and easy with no snapping or anything. Just some cutting and sanding and it was all done in 10 minutes The palette loves to eat dust or something, but thats alright, its not the sheets fault I dont think. Scratches pretty easily. These are simply puny scratches from a palette knife, so I will no longer be abusing my palette with a knife. I absolutely love the end product though,, and Im sure the problems I encounter are due to the fact that I transformed the sheet into something meant for more than display
-
Patrick Peartree
> 24 hourAs advertised and depicted. Quality. I drilled a hole for a little knob and use as a windscreen for my solar coffee maker.
-
Jimsky
> 24 hourNormally, I buy larger pieces of acrylic and have the rest for the next time I need it. But, getting fast delivery on just what you need without the shipping cost the larger pieces require (from other suppliers) makes Amazon a convenient place to make this 3rd party vendor (SimbaLux) purchase. If you need one of their exact sizes and thicknesses, its good to know the quality of the cut edges is better than I have ever seen - extraordinarily smooth and almost polished in appearance.
-
Home
> 24 hourNice Quality , be using this in another week.
-
The Crafts Man
> 24 hourExactly as described. Great experience overall. Will definitely buy from this seller again. Product was packaged well and flawless, no damage whatsoever. Thanks
-
michael donahue
> 24 hourlike very much.