SimbaLux Acrylic Sheet Clear Cast Plexiglass 12” x 12” Square Panel 1/4” Thick (6mm) Transparent Plastic Plexi Glass Board with Protective Paper for Signs, DIY Display Projects, Craft, Easy to Cut

Excellent product for exterior message board mounted on black door.

Perfect. Used it as a shelf in my refrigerator

I used this panel as a base for a homemade knife holder. It was thick enough to do the job and clear so that it disappeared in use.

The product was as advertised. 1/4 thick, clear as glass and easy to work with. I made a router base plate for a new dado jig I made. It cut clean on the table saw and was easy to drill. I even used an old1 1/8 spade bit on it and was able to get a perfect hole for the router bit opening. I will have no reservations buying this product again for future needs.

I used this to make a custom router plate. It came with a protective paper coating to prevent scratches; although, used for this purpose it scratched quickly and easily one used. It was easy to drill without cracking.

I ordered the black version of this sheet, its definitely pitch black and very sleek~ It feels bad calling this a mere sheet, it is quite thick but not to the point where its heavy (held in my hand). It needed to be cut and rendered into a palette that wouldnt bite of course, and the process was nice and easy with no snapping or anything. Just some cutting and sanding and it was all done in 10 minutes The palette loves to eat dust or something, but thats alright, its not the sheets fault I dont think. Scratches pretty easily. These are simply puny scratches from a palette knife, so I will no longer be abusing my palette with a knife. I absolutely love the end product though,, and Im sure the problems I encounter are due to the fact that I transformed the sheet into something meant for more than display

For the small job that I have it worked well.

Using as a crazy quilt template, so needed the heft as there are a lot of moving parts, so to speak. Creating nice uniform squares and efficient assembly.

i made a small case

I bought the 1/4 tinted plexi, and it was perfectly cut and packaged. I shaped it with a wood cutting blade (slowly), and it cut easily with no shards or melted edges.....somehow. I then filed the edges to a rounded shape, no problem. I drilled the mounting holes with actual plexiglass drill bits, but possibly could have gotten away with using regular twist drill bits in a drill press (sometimes they can grab and split plexiglass. This was a very substantial piece of tinted plastic and makes a great sun visor for me.