SimbaLux Acrylic Sheet Clear Cast Plexiglass 12” x 12” Square Panel 1/4” Thick (6mm) Transparent Plastic Plexi Glass Board with Protective Paper for Signs, DIY Display Projects, Craft, Easy to Cut

They turned out great! I laser engraved and cut them into medallions for a upcoming dog show

As described!

Bought a 12 x 12 x 1/4 sheet of acrylic to make new foot plates for my trim router as the original factory foot plate is too basic and its center hole is too large for standard guide bushings to be fitted. The sheet arrived well-packaged in bubble wrap inside a form-fitting box inside a larger Amazon box, which also contained some Forstner drill bits I needed for this project. It measured 1/16th under the 12 inches on both sides. I assume that the original large sheet is marked at exactly 12 inches and the cutting blade running along that line has a width of 1/8. Hence the loss of the 1/16th inch per cut sheet. Not an issue for my project, but would be if someone wanted exactly 12 square. The brown paper protection was ideal for marking out the sheet and it was left in place until all cutting, sanding and drilling was completed. I was able to power sand the acrylic up to the lines on the paper without the paper coming loose or fraying. The acrylic cut cleanly with my table saw (40 TPI), jig-saw and it was center-punched and drilled cleanly on my drill press (1700rpm) without cracking or melting. In conclusion, I do not hesitate to recommend this product.

The corner of the piece broke when I tried to drill a 1/4 inch hole on its corner. Looking at the piece the material had a texture that appeared rippled. I believe the piece had a defective spot in it. Luckily, I only needed half of the piece so I just used the other half.

This is a good product in great condition at a excellent price. I used it to make parts for a transparent remote controlled tracked robot with a mounted 5 DoF arm. Very happy with my purchase.

I was able to cut and drill just like the description said. I made a very nice router base. I will buy again now that I know I can make any router base I might need or any other jig I might need. Very happy with the product.

Normally, I buy larger pieces of acrylic and have the rest for the next time I need it. But, getting fast delivery on just what you need without the shipping cost the larger pieces require (from other suppliers) makes Amazon a convenient place to make this 3rd party vendor (SimbaLux) purchase. If you need one of their exact sizes and thicknesses, its good to know the quality of the cut edges is better than I have ever seen - extraordinarily smooth and almost polished in appearance.

Perfect for making jigs came well packaged

Fast shipping and well protected by bubble wrap. Arrived in perfect shape.

Very clear and stiff. Used for some cnc night lights bottom lit from a led base with good results