

















SRJTEK for iPad 2 Touch Screen Replacement A1397 A1395 A1396 Touch Digitizer Glass Parts,with Home Button + Cameral Holder + Pre-Installed Adhesive + Middle Frame Bezel(Black)
-
Autumn Krajcik
Greater than one weekThe casing was battered as if it had been previously returned by another user and then sent to me. It cannot be used because of the appearance.
-
Joel Khan
> 3 dayAdhesive wasnt as good as original. Tools were very cheap. Overall, it did the job.
-
Joel P.
> 3 dayEverything arrived as described in a very well padded container. I followed the instructions from a YouTube video with no issues. I was able to lift the cracked screen off with very little breakage. Installed the new screen and reassembled the iPad but the adhesive. Turned the iPad on but swiping would not work. I finally tried it vertical (camera at the bottom), the bottom two keyboard rows would work but not the top. I was able to swipe to the iPad but touching any app symbol would not work. Took it apart and tried reassembling it with the same results. Not sure if I did something wrong….. will try another screen. UPDATE: Second screen arrive today. Tried reinstalling the old severely cracked screen - no luck there. Tried the new screen with the same results. Something else must have gone wrong with the iPad. UPDATE - I have updated the original 3 stars to 5 stars because of the prompt response by sellers and their suggestions for troubleshooting along with the willingness to make it right.
-
Scott and Kat
> 3 dayTook about an hour. Well worth it. iPad is fully functional again.
-
Michaell Braga Lemos
> 3 dayGreat
-
Chris Vaughan
Greater than one weekFit perfectly. No problems at all. The instructions and tool kit sent with screen are great.
-
edwin angel
> 3 dayThank
-
Jay J. J. Stephenson
> 3 dayThe package arrived in a box and bubble wrapped. It included all the tools except cleaning wipes for the digitizer. I did not think I would need any as most screens come with a plastic protector. There was one on the front but there was not one on the back. I searched for and looked close to see if there was a protector but could not identify one. I noticed small debris and tried to wipe it with a micro cloth and it looked clean. After installing it and removing the front protective layer it was clear I could see scratches on the digitizer back. After taking a photo with a flash I noticed lots of dust also. There are many more mirco scratches on the digitizer that the camera does not pick up or show when the iPad is on. But when it’s dark you definitely you can see them all. The package did come with a glass protector but, no wipes.
-
Jack
> 3 dayDespite claims that home button and camera holder are included... They are NOT included! (As least not in the package I received.) I dont mind transferring the originals to the new screen, but the description clearly states these items are included.
-
Brad
> 3 dayI had an old iPad 2 sitting around that had a badly damaged screen. This kit was perfect, just check your model number and make sure to order the correct one. I highly recommend watching any of the several YouTube videos on how to replace your screen - and even narrowing that down to a video regarding your specific model is a good idea. There are a couple of places you have to be very careful when removing the old screen and those places change with different models. You do NOT need a heat gun - a hair dyer worked great for me and is probably a safer bet than a heat gun in the first place. Oh, why fix that old thing in the first place? Well, I keep and use all of my old iPhones and iPads. For instance, I have a drone with a 3D headset, and an old iPhone is permanently assigned to that task. An old iPad mounted in the car does nothing but play music, and an old iPad is doing the same thing in the boat. Just sync em occasionally with iTunes and youve got the same music and playlists on all of them.