SUNLU 3D Printer Resin 1KG, 405nm UV Curing Standard Photopolymer Rapid Resin for 4K/8K LCD/DLP/SLA 3D Printing, High Precision, Low Shrinkage, Grey 1000g

As a first time 3d resin printer owner, I purchased two different colors. Both printer as expected. I tried to go cheap without purchasing a washing and curing device. The clear in the sun requires a very close timing or it turns yellow. I also use acetone for a cleaner which worked great and is much cheaper than alcohol.

It was the cheapest, is good but at the same price I bought the other brand , not such a good buy

Great price for resin and its not to bad overall. Unless you are really needing HIGH quality, sunlu is a great choice and their standard is my favorite of all their options so far.

Grey is not grey like anycubic bluish grey or any other companies grey. its more a chalk white color. consistency is that of water. parts are brittle when done. i was trying off brands for test prints. i think ill keep looking. it does work

Good resin. I was able to easily find the print settings online and it printed without any issues. I would use it again.

Printed this Minion on a Elegoo Saturn, used the settings of base layer of 60 sec, layers at 5sec, 5 sec delay and movement of 3mm. First the print went well. No gummies left in the tank, and print was clean. Supports removed easily with warm water after an alcohol bath to remove excess resin. Cured out at 5 mins under a UV cure station. In all the print was great, and the experience was what it should be with a resin. Simple, easy to dial in, and the final product was great! Would recommend to any first time resin printer.

$21 for 1KG of Resin. Is a good deal. This is great Resin. Prints awesome, cleans off great. Details are amazing. And I didnt even have to mess with any of my machine settings. On my Mars 2 Pro I run at 25 sec. Bottom layer and 2.5 layer. I am printing very thin models and the supports come right off. Great strength and flexibility. If Sunlu can keep there price between $18-$22 for 1KG of resin. This is my go to stuff.

Nice Resin for the price. Great printing details with printing very tiny miniatures. No problem with build plate adhesion but to me this resin does smell stronger then other brands I have worked with. You also need to make sure you really rinse this brand well or the prints will be sticky. I would purchase this Resin again.

Price was fine but I probably wont be ordering again. Tried with a few different print settings. The recommended settings didnt have the fine detail I was used to and settings I found in the community brought the detail back but made the supports too difficult to remove. Overall not terrible for terrain but not what Im looking for on detailed 28mm figures. Printed on Anycubic Mono X

Sunlu Grey is the only resin i use in my GKone printer. Low odor, high adhesion, and easy cleanup of the finished item. The new square bottles are easier to store, handle, and pour from. Great support as well, if I ever have questions Sunlu is quick to reply. Best resin out there.