Thermal Grizzly Kryonaut The High Performance Thermal Paste for Cooling All Processors, Graphics Cards and Heat Sinks in Computers and Consoles (1 Gram)
-
Fishman
> 24 hourMuch, much easier to use than the liquid metal pastes, plus no chance of creating an electrical short if you use too mucy. For about one degree Fahrenheit difference, it is not worth the trouble the liquid metals. This is the best non-metallic thermal grease on the market! Easy to use, easy to spread, easy to remove and it does not go all over the motherboard! FYI--the 1.0 gram tube is enough for 5 Ryzen chips!
-
Krishna
> 24 hourI have legion y540 laptop i7 9th gen with 1660ti gpu. cpu undervolted to -150. Unfortunately i didnt took any benchmark tests before and after applying paste, cz i was just lazy. I was playing horizon zero dawn medium settings, gpu temp reaches to 86 and cpu above 96 ( in summer it even went to 99) while being undervolted. fps was around 70 but had frame drops to 50-55 every now and then. after applying paste gpu temp remains below 77 ( now no fps drops) and cpu around 85-90 sometimes it goes beyond 90 but falls below 90 rapidly. i might have applied little less paste on cpu dye :( anyways i undervolted cpu further to -155, now no cpu thermal throttling either. I have tested with other games too and gpu temp doesnt go beyond 80. Room temp around 28-30 c. Sorry i dont have any benchmark tests to show but it has worked at least for me.
-
Leonardo S.
> 24 hourHo acquistato questa pasta termica per sostituire quella ormai datata del pc da gaming di mio figlio.
-
Matt
> 24 hourUsed on both cpu and gpu dropped 5c
-
Arghya C.
> 24 hourmy laptop cpu tems were reaching 110+, now its stable within 75
-
Alejandro
> 24 hourThis thermal paste definitely works. I bought it to replace the default thermal paste for my laptop, an IdeaPad Gaming 3-15ACH6. Despite being a new laptop, the default thermal paste was very dry and looks more old. So I put this one, and it is working very well. I have a 3-10°C reduction. I couldnt do more tests, but the Furmark test and the Doom screenshots can give you a good idea how well is working this thermal paste.
-
barry houck
> 24 hourfast
-
MT
> 24 hourPackage was sealed, but Im not sure if I should be concerned if my product was manufactured in 2012* see picture.
-
Don Trail
> 24 hourWhat can you say its thermal past its thick and hard to spread evenly with the supplied spreader.
-
Gary Packer
> 24 hourArrived 4 days earlier than scheduled. Very easy to apply. Dropped CPU temps by more than 10 degrees. Enough in the tube for 3 or 4 CPU & GPU applications