









Thermal Grizzly Kryonaut The High Performance Thermal Paste for Cooling All Processors, Graphics Cards and Heat Sinks in Computers and Consoles (1 Gram)
-
ARad
> 24 hourmy MSI laptop was running very hot (96 degrees!) to a point that my games were all laggy, I used this thermal paste to replace the original paste on my cpu and gpu, also i used the grizzly minus thermal pads to replace the original pads inside the laptop. 15 degrees temp drop under heavy loads and no more lags ! its very easy to spread with the included tool.
-
Kevin G
> 24 hourI have been using grizzly for 4 years now and I have never had an issue with it. Easy to spread and it has some of the best heat transferring properties on the market.
-
John ridley
> 24 hourBearly enough to cover the CPU wasnt easy to spread.
-
Walkers Gaming PCs
> 24 hourI ordered this on Amazon through Onyx PC I verified the authentication card inside the package and I got good temps everything seems legit to me.
-
Matt
> 24 hourBest thermal paste out there !
-
Abraham J
> 24 hourAt first you might think there isnt enough compound in the small tube, however you can repaste thermals of a laptop more than twice with the amount provided.
-
AVillage
> 24 hourディスクトップパソコンのファンの音が大きくなったように感じて、CPUやGPUなどの温度確認のアプリがあることを教えてもらって導入しました。その結果、CPUの高負荷時に、温度が100℃を越えていることが分かり、ビックリ。今まで気にもせずに使い続けていましたが、CPUが壊れなかったのは幸いでした。内部のホコリ汚れはほとんど無く、クーラーの熱伝導グリスが固まっているのではと言われて確認するとガビガビに固まっていました。グリスの種類が沢山あって、どれが良いのか分かりませんでしたが、熊グリスが良いよと言われて、これにしました。他のグリスを比較して使用していないので、最良かどうか分かりませんが、25℃も下がって高負荷でもファンの音が静かになったので満足しています。通常時には60℃から40℃位に下がりました。1gの量でしたが、あと2回くらいは塗れそうな量が余っているので、固まらなければグリスの塗り替えが出来そうです。
-
Pierre
> 24 hourMa permis de descendre la température de mon CPU de 74 à 65° en charge après 2h sur Battlefield 5. Lapplication a été plutôt simple, mais la dose d1g semble tout juste suffisante pour 1 processeur. Lancienne patte thermique était de millieu 2014...
-
xRockabilly87x
> 24 hourHabe mir die Paste geholt, weil sie in diversen Test unter den Top3 rangiert.
-
CL
> 24 hourI build custom gaming computers for a second income. I build 8-9 per month and I use Thermal Grizzly Kryonaut on every one of my builds. Temperatures range from 28-32c at idle to 60c-65c under stress test load using Kryonaut.