Thermalright Intel 12th/13th Generation LGA1700 Anti-Bending Buckle,CPU Stress Bending Correction Fixer, Curved Pressure Plate,Fully Fitted and Fixed Without Trace Installation (Black)

Las nuevas generaciones de Intel tienen la característica de llevar temperaturas elevadas, además que el Bracket instalado para soportarlo en la tarjeta madre ejerce una presión asimétrica del CPU a los Pines, esto ocasiona que con el tiempo las temperaturas hagan un Ablandamiento en la superficie total del CPU, no habría problema si el bracket que soporta al CPU ejerciera una presión simétrica sobre la superficie comoleta de éste, sin embargo las áreas con altra presion comienzan a doblarse sobre aquellas que no cuentan con la presión suficiente, al momento de instalarlo fue super sencillo, las temperaturas de mi i7-12700k no superan los 35 grados en tareas simples y a máxima exigencia no supera los 71°C, es una inversión muy buena y prevenir el daño sobre una pieza tan importante como el cpu vale la pena.

This is my first build in 4.5 years, so this time around I wanted to do tons of research. Im installing a CPU water cooler for the first time ever and researching that a fair amount led me to these CPU brackets. Ive never been satisfied with the cheezy, light weight CPU brackets/fasteners which come standad on MBs. This seemed like a valuable asset for just $14. Im running a 13th Gen Intel on an MSI Z690 ACE MB. As you can see from the pic, the fit looks very clean and the aluminum bracket is well machined. I do not know if temps will be lowered vs the stock guillotine bracket but it sure holds the Intel in place far better. And that can only be good.

I was skeptical, but after struggling with my OC 13700K temps despite custom loop I decided to give this a try. No change in ambient, test, or overclock with a 12 degree delta. 12 degrees for a ten minute installation is massive. Cinebench caps at 88 now when I was hitting 100 and throttling previously. 5.7ghz all core and happy.

Before installing this contact frame on my i7 13700k, I was getting temps around mid 70’s while playing Escape From Tarkov and Insurgency Sandstorm. I have my cpu undervolted by .1 and overclocked by 100mhz (very mild imo). I’m about 5 hours into gaming after installing, and my MAX cpu package temp so far has been 68C, but average is 60C!!! That is a huge improvement from before. Very glad I spend the 12 bucks!

Corrected a warp that caused uneven cooling. Works great to properly secure the processor and allow for proper mounting of a cooling solution. Made from aluminum not plastic. Remains straight under pressure.

Luckily I stumbled upon a video from Gamers Nexus highlighting these. Bought one because why not. Easy to install and it feels like my cooler is more secure than ever. I am running a z790 board with an Intel 13700k. My temps havent even needed to kick the fans on full blast yet.

I honestly did not watch the review of this plate on Gamers Nexus. I did watch Steves review of the Thermal Grizzly one though but when I saw how much it was going for I was like NOPE. I thought well lets spend $12 and if it sucks then Ill buy Der8auers. I love the lil German guy. Honestly I just slapped this one on. Didnt do all that putting marks on the screws and slowly tightening it down like Mike did. Temps were lower than the GN reviews so I guess I slapped it on my 13900k right. I am using a 360 Lian Li AIO though. So go ahead and buy it. If you get something different then you may need to remount it or have one that may be out of tolerance.

As per gamers nexus and jays two cents, this provided a better pressure distribution on my cpu. Low profile and more reliable than the stock bracket

facil instalacion y cumple su funcion

Once I saw a video on this item, I decided to purchase one. It is as good, if not better than the name-brand one. Dont waste your money getting a name-brand one. This one does a great job keeping the CPU flat and has proper contact wth your cooling device.