













Thermalright Intel 12th/13th Generation LGA1700 Anti-Bending Buckle,CPU Stress Bending Correction Fixer, Curved Pressure Plate,Fully Fitted and Fixed Without Trace Installation (Black)
-
Eric
> 24 hourdecided to rebuild my computer using a i7-12700k and from what i read and what all my builder friends told me, having this retainer is a must for the long term, as it helps mitigate temperature spikes and evens out the CPU to Cooler contact, allowing for an even heat distribution. Now, I’m not super computer savvy and I’ve only built 3 computers in my lifetime, but if I can install this easily, than anyone can.
-
audiom3
> 24 hourThis is my first build in 4.5 years, so this time around I wanted to do tons of research. Im installing a CPU water cooler for the first time ever and researching that a fair amount led me to these CPU brackets. Ive never been satisfied with the cheezy, light weight CPU brackets/fasteners which come standad on MBs. This seemed like a valuable asset for just $14. Im running a 13th Gen Intel on an MSI Z690 ACE MB. As you can see from the pic, the fit looks very clean and the aluminum bracket is well machined. I do not know if temps will be lowered vs the stock guillotine bracket but it sure holds the Intel in place far better. And that can only be good.
-
El JJ
> 24 hourTengo una motherboard Z690-F de Asus y desde que coloqué el procesador intel i9 13900k hace 3 meses noté que quedó con demasiada presión con su soporte de CPU Stock. Decidí adquirir este LGA1700-BCF para quitarle esa presión al procesador, el cambiarlo fue realmente fácil ya que te incluye la llave para los tornillos que lo fijan a la motherboard. Las Temperaturas que obtenía en mi procesador eran realmente buenas, sin carga Variaban de 32 a 36 grados y con Cargas extremas pegaba a los 80 grados y más. Después de Cambiarlo noté que sin cargas está entre los 28 y 29 grados y con cargas obtuve en promedio 6 grados menos de Temperatura, el rating de mi cooler en Bios me dió un valor de 177 puntos lo cual es excelente para controlar las temperaturas. Este accesorio lo adquirí para evitar esas flexiones del procesador y cuidar su tiempo de vida lo más posible y no tanto por controlar las temperaturas, lo cual fue como un plus el obtener esos 3 o 6 grados menos en la temperatura. Cabe mencionar que tengo activo el overclocking de ASUS con frecuencias del procesador de hasta 6200MHZ. Si deseas cuidar tu inversión de 12va o 13va generación cambiando el adaptador stock, super recomendado este producto para reemplazar ese Frame LGA1700.
-
Jonathan
> 24 hourLiterally dropped temps by 20c just by adding this to my i5 12600k.
-
Scott C
> 24 hourI tried this modification because I didnt like how much torque was being applied to my CPU when using the stock fastener. I am not sure if it was actually bending the chip but it was under too much pressure in my opinion. Temps improved slightly. Easy to remove original and install and looks cleaner than original silver clamp. Comes with tool to remove and reinstall screws.
-
Evan
> 24 hourThis product didnt reduce the temps too much, maybe 5C at full load. However, I got this product for the longevity of the CPU health. This way I can guarantee CPU bend doesnt happen over time.
-
Chris Reichelt
> 24 hourWorks as advertised definitely dropped temps byba few degrees only thig I wish I did not say Intel 12 gen on it not really needed and especially when your using it on a 13th gen
-
peter harris
> 24 hourEasy to install and help with thermals
-
73
> 24 hourIf you have a 12th or 13th gen processor, this is a must have. I installed this frame on two different computers and it dropped temps by at least 8 degrees on each. Install is super easy if you follow the steps in the Gamers Nexus youtube video.
-
José A.
> 24 hourExcellent product.