













TICONN 200PCS Heat Shrink Butt Wire Connector Kit, Insulated Waterproof Electrical Wire Crimp Terminals Butt Splice for Marine Automotive (200PCS)
-
Cathy K.
> 24 hourThere was only one item in the package. I had already received the RV jack socket drill adapter. The TICONN 200PCS Heat shrink butt connectors were not in the package and the package was sealed tightly.
-
Dr. Elton Johnston PhD
> 24 hourlooks like great set up easy to use.
-
Michael Lyon
> 24 hourWorked great and sealed as advertised !!
-
Thomas T.
> 24 hourYou don’t have to be an electrician to appreciate this set, but it may actually help to use it properly. Then again, if you have a crimper, heat gun, and two wires to be connected, you’re in luck. Simply strip the insulation from wires an appropriate length at the end and insert both ends into the crimp to collapse the metal tube to hold the wires. The stripped section should be fully inside the tube, but obviously not the wire insulation. Tuck on the wire to make sure you have a strong connection and then use a heat gun to sharing the tubing onto the wire jacket. That’s basically it.
-
brian
> 24 hourNo problems
-
Raymond Adams
> 24 hourThese came in three different sizes and worked great for splicing my wire on my 2006 Silverado for my blower motor fan module. They do make them now that dont require you to crimp and then melt ends with a heat gun. They make some that will also melt the crimp middle part plus the ends. But, these worked great just had to crimp wires together which is no big deal. Very pleased!
-
vernon
> 24 hourWater resistant? Havent tried it
-
Bryson Scarborough
> 24 hourGreat product and easy to use and heat shrink works great protecting against water.
-
Griffin Truck
> 24 hourGreat quantity for the money
-
Chris Ferguson
> 24 hourI use these for ALL wire splicing. Prevents the long term corrosion that eventually occurs.