Uniden BCD325P2 Handheld TrunkTracker V Scanner. 25,000 Dynamically Allocated Channels. Close Call RF Capture Technology. Location-Based Scanning and S.A.M.E. Weather Alert. Compact Size.

(931 Reviews)

Price
$209.40

Quantity
(10000 available )

Total Price
Share
200 Ratings
90
68
20
8
14
Reviews
  • SpiceMan

    > 24 hour

    WOW ... What a great DIGITAL scanner!!! Works like a champ in my big city. Allows me to listen in on all kinds of action with law enforcement, fire, ambulance, DPS, and more. A WORD OF CAUTION ... this scanner is NOT for the person who is not familiar with high-end scanner programming! It will drive you CRAZY very quickly. Personally, I use a computer with the downloadable Freescan software, in conjunction with RadioReference.com, to program mine, and it works great! After mastering the learning curve with these tools, I was able to program / transfer over 600 channels into the scanner, using the USB cable, in less than 2 minutes. This scanner has SO MANY FEATURES AND CAPABILITIES, that its a never ending ( and pleasant ) learning process. Rather expensive, but I really enjoy my Uniden BCD325P2! DO YOUR RESEARCH BEFORE YOU BUY!!!

  • Scott

    > 24 hour

    Radio is good. there is a learning curve but isnt bad for those who are familiar with electronic radios. Found everything i needed to program this via youtube, radioreference, and the owners manual. Only complaint is that the software for firmware updates is windows only, No Mac software available. Uniden ships the unit with 2015 firmware, which needs to be updated with a windows pc. :-/

  • Kimberly

    > 24 hour

    Lots of fun to listen to the surrounding Dispatches! I probably shouldve listened to the reviews, and not purchased this as a first time scanner. It came unprogrammed, so I couldnt listen to anything until I searched the manual on doing a basic scan of the entire frequency spectrum. So I tried the freescan software. And that was even difficult to understand. Then I found the ARC XT Pro software. Downside, freescan is free but time consuming to use and ARC is either $40 or $70 (depending on what you want), but its FASTER!! So within 15 minutes of loading up the ARC software and playing around a little (in the trial version), I was able to program my scanner, and listen to the city police, fire and ambulatory dispatches, as well as a few surrounding areas! The only other thing thats not very cool, is the battery life (again noted in the reviews). About 2 or 3 hours of continuous use and it starts beeping at you to replace the batteries. At least its only 2 double As. But you can always just leave it plugged into a power source with the USB Plug. Overall, I am very pleased with this scanner. It is very fun!

  • Mateo Hintz

    > 24 hour

    Unable to receive local public service activity. Completely useless. Programming with RR/premium yields a relatively ugly paperweight that simply never makes any noise ... Oh well...

  • RF Guy

    > 24 hour

    I have both this unit, the BCD325P2 and also the BCD436HP. This scanner is a more user friendly model based on the awesome Uniden 396XT scanner. But this BCD325P2 scanner adds P-25 (Phase 2) Digital reception. This unit does not use an SD card for memory, it has internal memory only. But it is plenty. You cant record/playback things, nor does it have the full RadioReference database included in the memory. But it is more user friendly. The display is a standard size but the font is Big and Bold thick letters which you can easily see from a few feet away. The backlight is orange only but really, it is the best display you could ask for. The other BCD 436HP scanner display you cant read good from a few feet away, Any of you past 40? You can program this model a bit easier (by hand) if you want to, you Do Not get free software with it, but can use other vendors software. I tried to program it with the USB cable in Win7 and it works, but you have to download the specific driver for it from the Uniden site and set this up in your Windows Control Panel/Device Manager/Add Driver install screen. It is a bit confusing at first, you wont see the file to add at all. And you still need the programming software to get the channel frequencies into this. As far as reception, the digital P-25 (Starcom21 my area) sites are incredible, it receives just as good as the BCD436HP, I would say it equals or exceeds the BCD436HP in digital reception of phase 1 in terms of signal strength and actual voice quality at the speaker. It receives digital signals like an upgraded version of the 396XT, which has ears like the NSA. VHF/UHF reception is about the same as the rest of my scanners. I used the stock antenna and it works fine for me, but the RS 800 mhz will give you optimal digital signals. You dont get backlit buttons on this unit and it uses only 2 AA batteries, which give me about 6-8 hrs with 2400 NiMH. It is a Handy size scanner. The BCD325P2 also has a true Band Scope function which acts like a mini spectrum analyzer for checking signal strength of an individual frequency or a frequency area, very useful for graphically seeing how much trunking signal that youre receiving at the scanner. With digital scanners, this is gold, as moving the scanner just an inch or two will be like going from full signal to no signal with the stock antenna. Whered my signal go? Run the Band Scope and see it disappear and come right back as you move the scanner a whole two inches on the table. Now you can see signals like the engineers do and find the best place to set your scanner. A wonderful feature for the hard core scanner fans. The BCD325P2 is a digital scanner with P-25 (Phase 1 & Phase 2) that receives digital signals incredibly well. It offers a ton of features for the size and a Great Display. While digital scanners nowadays are not easy to setup, I find this one less challenging than the BCD436HP. This is a more user friendly digital scanner with really good ears for hearing digital P-25 stuff.

  • Rick R

    > 24 hour

    Nice small size and covers all the new freq without an issue. Easy to use.

  • Jeff

    > 24 hour

    The learning curve was a little steep for programming. You have no choice but to join and use Radio Reference if you want to program trunks. After a couple days of reading and several attempts, I finally got most of the Police, Fire and Rescue, the State Police and the Public Utilities. I added the GPS and it automatically locks out stuff thats out of range. I only use that in the car because it needs to be plugged into a USB power source or it kills the battery.

  • Pam Smith

    > 24 hour

    Its was hard to setup but I went on line to YouTube and found the help I needed.

  • Gus

    > 24 hour

    I have the BCD325P2 scanner and I love it. It took me a while to get the hang of programming it manually, but then I found ProScan, which is an online software that allows you to control and program the scanner from a computer. The scanner feels sturdy and the included antenna does its job. However, even though I live in Los Angeles County, I found that the scanner antenna wasnt cutting it for picking up frequencies throughout LA County, so I bought and set up a rooftop discount antenna and ran cable into my home, and the quality of what Im picking up now is just amazing. I gave this scanner 4, rather than 5, stars because unlike its big brother in the 436 series scanner, this one only has capacity for two AA batteries. The most amount of time Ive gotten out of it was about 2-2.5 hours with the backlight on. Given that most of the time the scanner is on my desk, its always connected to the computer and thus isnt running off batteries. However, for those times when I will need to take the scanner mobile with me, Ill need to bring the USB cable and find a portable charger to go.

  • J Wagner

    > 24 hour

    Some advice based on my experience, my opinion only . I am amateur radio operator, so I am familiar with frequency databases, and programming radios to hear what I want. 1. The only way to go is to use the free scanner programming software. 2. sign up up for an account on Radio Reference. 3. Use the software to pull the freqs you want form the RR web-site. Once programmed, the BCD325P2 is great to use. Has good sensitivity. This is the best scanner Ive owned. 4. Invest in extra NiMH batteries and a charger. The BCD325 only charges when it is turned off and uses a timer to prevent overcharging which may result in the built-in charger shutting off before the batteries are fully charged resulting in short battery life. Pay attention ! Its a very good scanner.

The BCD325P2 comes equipped with Uniden exclusive features like Advanced Dynamic Memory System, Close Call RF Capture Technology, and GPS compatibility. It also includes support for the latest APCO Project 25 Phase II systems.

Related products

Shop
( 1979 Reviews )
Top Selling Products