WiFi Extender Signal Booster Long Range Coverage to 8000sq.ft and 45+ Devices, WiFi 2.4&5GHz Dual Band WPS WiFi Signal Strong Penetrability, 360°Coverage Supports Ethernet Port
-
REBECCA
> 24 hourThe extender that I had purchased works extremely well. I was having trouble logging into Netflix on my smart TV because my router was located in a different part of my house. Once I got Ac750 up and running I have had no problems logging on to Netflix on my smart TV. DB
-
Simone B.
> 24 hourLabbiamo ordinato per luso On Demand essendo abbonati della Sky. Ha funzionato senza problemi. Il prezzo è giustissimo e la consegna era piùttosto veloce. Il cavo è consigliatissimo.
-
CHRISTINE
> 24 hourPurchased to increase ability and reliability to connect to a weak wifi router signal. Works beautifully. Result is more than I could have hoped for. Great purchase.
-
JEREMY
> 24 hourOur main Internet is all the way in the back of an old-school brick construction, and so weve always had slightly spotty reception in the living room and a near-dead spot on the couch. The Wi-Fi is clear all the way out to the front lawn, the dead spot is gone, and the house PC now plugs into this for much faster Internet. Quick and easy push-button install, clear instructions, and after its set up you plug it in and enjoy. A pleasure to have.
-
MARY
> 24 hourWorks real good and I ran speed test and my internet upstairs in our house almost matches down stairs speed next to wireless router
-
JEREMY
> 24 hourworks perfectly and so easy to set up.... now that distant spot in house is covered by wi fi. Note, wi fi a bit slower through this system. But i am still streaming videos with it so I consider it a 5 star item.
-
CHRISTINE
> 24 hourDid a wonderful job of extending my home Wi-Fi coverage! Setup was a breeze; did not require cables or the packaged CD software.
-
KEITH
> 24 hourWorked awesome. Very easy to clone your router and extend its range. There is youtube videos and a very easy to follow guide that comes with the unit.
-
BENJAMIN
> 24 hourwent from having little to no wifi service in areas of my house to full service in most areas of my home.
-
Klecki
> 24 hournichts hinzuzufügen
|
|
|
|
|---|---|---|
4*3 dBi External Antennas180° and 90° rotating antennas can eliminate dead area and improve your existing WiFi coverage. For better performance and stable WiFi network with speeds of up to 867Mbps, 2.4GHz has farther penetration while 5GHz has faster speed |
Smart Signal IndicatorsSignal LED indicates wireless signal strength between WiFi extender and your existing router. After initial setup, you can move your WiFi extender to any electrical outlets by reading the color of signal LED. |
With Vent Hole & WAN / LAN PortAir vents on both sides enhance heat dissipation capacity of the WiFi extender and ensure a safe working environment. Its WAN / LAN Port allows the WiFi extender to act as a wireless adapter to turn a wired device into a wireless one. |
|
|
|
|
|---|---|---|
Repeater Mode - Wireless to WirelessAmplify the WiFi signal of the wireless router, extend the coverage of the WiFi signal, and effectively solve the problem of weak WiFi signal and WiFi dead zone. (Suitable for home, office use) |
Repeater Mode - Wireless to WiredConvert wifi signals into wired signals through network cables to meet the network requirements of wired electronic devices, such as TVs, desktop computers, etc., reduce the distance of network cables, and avoid cluttered network wiring. |
Access Point Mode- Wired to WirelessUse Ethernet cable to connect this WiFi booster range extender to any Internet enabled Ethernet port in your room or Ethernet port of existing router, you can create a new dual band wireless network. Excellent for using at home or when travelling in hotel rooms. |
Reminder:
- The working status of the repeater can refer to its smart indicator light.
- WiFi signal booster is only limited to increase the coverage of the wireless signal, but not to increase the speed of the network.
- When the repeater expands the signal, it does not need to plug in the network cable. It can receive the signal of the router directly by plugging it into the socket, and transmit the wireless signal.
- When the repeater is unplugged or powered off after the setting is completed, it does not need to be reset. The original configuration information has been saved, unless you manually restore the factory state.
Related products
