WiFi Extender Signal Booster Long Range Coverage to 8000sq.ft and 45+ Devices, WiFi 2.4&5GHz Dual Band WPS WiFi Signal Strong Penetrability, 360°Coverage Supports Ethernet Port
-
JOYCE
> 3 dayOur Wifi signal was not reaching a tv in our basement so I purchased this to extend the signal. Set up was a breeze and it was working within 5 minutes.
-
JOYCE
> 3 dayWe are staying in a 2 floor house with many doors and walls between the router and the rooms we needed wifi to reach. I ordered the extender to extend the signal and it is awesome. simple instructions on how to set it up, took me 3 mins. The signal is good. Like I have the router right in those rooms. good item.
-
En Öz
> 3 dayErfüllt seinen Zweck
-
KIMBERLY
> 3 dayIt works great we have family that live in front of where we live, and we use this to use their wifi, and get a pretty strong signal
-
Simone B.
> 3 dayLabbiamo ordinato per luso On Demand essendo abbonati della Sky. Ha funzionato senza problemi. Il prezzo è giustissimo e la consegna era piùttosto veloce. Il cavo è consigliatissimo.
-
JEREMY
> 3 dayI use it in the Master room, which is on the opposite side of our house from the office the internet line is in. Havent owned it very long, but is working great. Very easy to set up.
-
SANDRA
> 3 dayThis is one handy device. I wanted to use my laptop while sitting on the porch, but the wifi we had just didnt reach out there. This little baby makes it all possible. Easy to setup/install. Works great.
-
JEREMY
Greater than one weekVery easy to install, provides great wifi range in the home where its really needed. Ive only had it for about a month and no problems as of yet. Highly recommended.
-
SANDRA
Greater than one weekEasy installation and setup. This little unit extended the range of my Wi-fi network throughout my home. I highly recommend it.
-
hbgbbxvv
> 3 dayEasy to set up. Didnt think it was working at first but it did pick up the wifi signal. I went from 28% reception to 82% reception on my devices furthest from the modem. Very pleased.
|
|
|
|
|---|---|---|
4*3 dBi External Antennas180° and 90° rotating antennas can eliminate dead area and improve your existing WiFi coverage. For better performance and stable WiFi network with speeds of up to 867Mbps, 2.4GHz has farther penetration while 5GHz has faster speed |
Smart Signal IndicatorsSignal LED indicates wireless signal strength between WiFi extender and your existing router. After initial setup, you can move your WiFi extender to any electrical outlets by reading the color of signal LED. |
With Vent Hole & WAN / LAN PortAir vents on both sides enhance heat dissipation capacity of the WiFi extender and ensure a safe working environment. Its WAN / LAN Port allows the WiFi extender to act as a wireless adapter to turn a wired device into a wireless one. |
|
|
|
|
|---|---|---|
Repeater Mode - Wireless to WirelessAmplify the WiFi signal of the wireless router, extend the coverage of the WiFi signal, and effectively solve the problem of weak WiFi signal and WiFi dead zone. (Suitable for home, office use) |
Repeater Mode - Wireless to WiredConvert wifi signals into wired signals through network cables to meet the network requirements of wired electronic devices, such as TVs, desktop computers, etc., reduce the distance of network cables, and avoid cluttered network wiring. |
Access Point Mode- Wired to WirelessUse Ethernet cable to connect this WiFi booster range extender to any Internet enabled Ethernet port in your room or Ethernet port of existing router, you can create a new dual band wireless network. Excellent for using at home or when travelling in hotel rooms. |
Reminder:
- The working status of the repeater can refer to its smart indicator light.
- WiFi signal booster is only limited to increase the coverage of the wireless signal, but not to increase the speed of the network.
- When the repeater expands the signal, it does not need to plug in the network cable. It can receive the signal of the router directly by plugging it into the socket, and transmit the wireless signal.
- When the repeater is unplugged or powered off after the setting is completed, it does not need to be reset. The original configuration information has been saved, unless you manually restore the factory state.
Related products
