WiFi Extender Signal Booster Long Range Coverage to 8000sq.ft and 45+ Devices, WiFi 2.4&5GHz Dual Band WPS WiFi Signal Strong Penetrability, 360°Coverage Supports Ethernet Port
-
MARGARET
> 3 dayExtremely easy to connect using the push button method (WPS)! Now ALL my devices work in spots that had really low wireless readings...went from 2-5 Bars!!!VERY PLEASED
-
BENJAMIN
> 3 dayI use in my house, because I have router in my bedroom, I putting in the living room, and now I have 100% signal on the rest of the house..
-
Pelzi
Greater than one weekwenn man weiß, was man braucht, kann man bei der Bestellung ja eigentlich nichts falsch machen; das Kabel erfüllt seine Pflicht, mehr gibts dazu nicht zu sagen.
-
SANDRA
> 3 daythis wifi Repeater works great in our 5,000 foot house!!! just needed to buy 4 and not just 1.My 14 year old cud set it up in 5 min. Excellent coverage from 30 feet away
-
Dennis und Anni
> 3 dayDas Kabel ist absolut in Ordnung und vom Preis top.
-
CHRISTINE
> 3 daythis is a great device. really delivers. easy set-up. smaller than expected. nicely designed and manufactured. instructions are good and Netgear website is well done. arrived early. highly recommended
-
MARGARET
> 3 daywent from having little to no wifi service in areas of my house to full service in most areas of my home.
-
olga torres
> 3 dayIt is the best thing we ever got for our internet service. I have a shop close to my house ,my internet was not strong when I took my laptop out there with me. It puts out its own signal so when I need internet in the shop, I just choose that part of my network to connect to, its as strong as it is in the house. I dont know what we would do without it. If you have a large house or a location that is too far from your internet, you need it. It works good.
-
JEREMY
21-11-2024Amazing does exactly what we needed it for to extend the WiFi for further reach in our basement
-
BENJAMIN
> 3 dayFrom box to completely set us was just a few minutes. No problems at all and I now have a strong signal through out my entire house.
|
|
|
|
|---|---|---|
4*3 dBi External Antennas180° and 90° rotating antennas can eliminate dead area and improve your existing WiFi coverage. For better performance and stable WiFi network with speeds of up to 867Mbps, 2.4GHz has farther penetration while 5GHz has faster speed |
Smart Signal IndicatorsSignal LED indicates wireless signal strength between WiFi extender and your existing router. After initial setup, you can move your WiFi extender to any electrical outlets by reading the color of signal LED. |
With Vent Hole & WAN / LAN PortAir vents on both sides enhance heat dissipation capacity of the WiFi extender and ensure a safe working environment. Its WAN / LAN Port allows the WiFi extender to act as a wireless adapter to turn a wired device into a wireless one. |
|
|
|
|
|---|---|---|
Repeater Mode - Wireless to WirelessAmplify the WiFi signal of the wireless router, extend the coverage of the WiFi signal, and effectively solve the problem of weak WiFi signal and WiFi dead zone. (Suitable for home, office use) |
Repeater Mode - Wireless to WiredConvert wifi signals into wired signals through network cables to meet the network requirements of wired electronic devices, such as TVs, desktop computers, etc., reduce the distance of network cables, and avoid cluttered network wiring. |
Access Point Mode- Wired to WirelessUse Ethernet cable to connect this WiFi booster range extender to any Internet enabled Ethernet port in your room or Ethernet port of existing router, you can create a new dual band wireless network. Excellent for using at home or when travelling in hotel rooms. |
Reminder:
- The working status of the repeater can refer to its smart indicator light.
- WiFi signal booster is only limited to increase the coverage of the wireless signal, but not to increase the speed of the network.
- When the repeater expands the signal, it does not need to plug in the network cable. It can receive the signal of the router directly by plugging it into the socket, and transmit the wireless signal.
- When the repeater is unplugged or powered off after the setting is completed, it does not need to be reset. The original configuration information has been saved, unless you manually restore the factory state.
Related products
