WiFi Extender Signal Booster Long Range Coverage to 8000sq.ft and 45+ Devices, WiFi 2.4&5GHz Dual Band WPS WiFi Signal Strong Penetrability, 360°Coverage Supports Ethernet Port
-
JOYCE
> 3 dayI needed to get relay from the equipment in the cellar to the top (third) floor - set up the unit on the first floor and it works very well. Very easy to do.
-
MARY
18-11-2024This range extender helped me a lot to extend the wi-fi signal to my media room which is upstairs and far away from the router. Easy to install and setup. Happy customer.
-
mei zhang
> 3 dayIt was easy to set up and extended the range of my internet from across the house. I was able to return one I purchased at a local store for 3x the cost on the same day I found this one at Amazon.
-
KIMBERLY
Greater than one weekExcellent product. Super easy to set up, and cleared up dead zones in our house.House is about 2500 sq ft. I would highly really recommend this product!!
-
KEITH
> 3 dayThis extender is perfect for use in my garage. 200 ft from modem. If you pick the best channel it works amazing.
-
PATRICIA
> 3 dayworks great....has about 20% of the speed though of connecting to your wireless router directly...ok for streaming movies though and very pretty easy to setup.This worked flawlessly out of the box! Very happy with this purchase. I needed it to connect my TV to the internet as the wireless adapter in the TV was a piece of junk. I connected the TV to the extender via ethernet cable. It solved my problem!
-
BrevisRecensio
> 3 dayDas Kabel funktioniert soweit gut. Allerdings ist nach einiger, jedoch meiner Ansicht nach, nicht zu grosser Belastung, der Aussenmantel gebrochen! Die Tristed-Pair Kabelstränge funktionieren jedoch weiterhin gut und es gab bisher auch keine weiteren Probleme! Wenn man allerdings nach einem kabel mit flexiblem Mantel sucht, bin ich mir nicht sicher ob ich dieses hier empfehlen kann!
-
MARGARET
18-11-2024I used it in a duplex to get signal from the modem (on the 1st floor) to the attic (3 floors away from the modem) and had a beautiful signal the entire time.
-
MARY
> 3 dayWorks great and solves the problem of range in a two story house.Works great and solves the problem of range in a two story house.
-
MARY
> 3 dayI am super happy with this extender so far. It is easy to set up and works great anywhere in my house and it is not big and ugly.
|
|
|
|
|---|---|---|
4*3 dBi External Antennas180° and 90° rotating antennas can eliminate dead area and improve your existing WiFi coverage. For better performance and stable WiFi network with speeds of up to 867Mbps, 2.4GHz has farther penetration while 5GHz has faster speed |
Smart Signal IndicatorsSignal LED indicates wireless signal strength between WiFi extender and your existing router. After initial setup, you can move your WiFi extender to any electrical outlets by reading the color of signal LED. |
With Vent Hole & WAN / LAN PortAir vents on both sides enhance heat dissipation capacity of the WiFi extender and ensure a safe working environment. Its WAN / LAN Port allows the WiFi extender to act as a wireless adapter to turn a wired device into a wireless one. |
|
|
|
|
|---|---|---|
Repeater Mode - Wireless to WirelessAmplify the WiFi signal of the wireless router, extend the coverage of the WiFi signal, and effectively solve the problem of weak WiFi signal and WiFi dead zone. (Suitable for home, office use) |
Repeater Mode - Wireless to WiredConvert wifi signals into wired signals through network cables to meet the network requirements of wired electronic devices, such as TVs, desktop computers, etc., reduce the distance of network cables, and avoid cluttered network wiring. |
Access Point Mode- Wired to WirelessUse Ethernet cable to connect this WiFi booster range extender to any Internet enabled Ethernet port in your room or Ethernet port of existing router, you can create a new dual band wireless network. Excellent for using at home or when travelling in hotel rooms. |
Reminder:
- The working status of the repeater can refer to its smart indicator light.
- WiFi signal booster is only limited to increase the coverage of the wireless signal, but not to increase the speed of the network.
- When the repeater expands the signal, it does not need to plug in the network cable. It can receive the signal of the router directly by plugging it into the socket, and transmit the wireless signal.
- When the repeater is unplugged or powered off after the setting is completed, it does not need to be reset. The original configuration information has been saved, unless you manually restore the factory state.
Related products
