10Gb SFP+ RJ45 Transceiver, 10Gbase-T SFP+ Ethernet Module Support 10G/5G/2.5G/1.25G, Compatible with Cisco SFP-10G-T-S, Ubiquiti UF-RJ45-10G, UniFi, Meraki,MikroTik,Supermicro and More, 30m

(852 reviews)

Price
$8.88

None
Quantity
(40000 available )

Total Price
Share
147 Ratings
115
11
4
5
12
Reviews
  • Prof. Alfred Jacobson

    > 24 hour

    Locked up the 10gig Nic card so not good.

  • Tyler Hacker

    > 24 hour

    Nice product. Great addition to my home lab.

  • JT

    > 24 hour

    Plugged in, worked right away

  • Lee Kennedy

    > 24 hour

    Ive used these H!Fiber.com 1000Base-SX Transceiver Gigabit Multimode SFP to LC Modules on two occasions and both times theyve worked well. No problems or fuss just plug and play.

  • Mach

    > 24 hour

    Want to pair/uplink 2 or more switches, well look no further than those SFP adapter. Well built, durable and fast.

  • jane

    > 24 hour

    Good work with cisco 3750

  • John

    > 24 hour

    SFP+ transceiver connected and obtained a good speed throughput, but random Network Link disconnects happened every few minutes with Windows 10 (with updated Intel drivers version 27), thus causing intermittent disconnects to other resources. I replaced with another set of transceivers and they worked flawless without disconnects on same endpoint devices.

  • J Hogg

    > 24 hour

    Some worked, some identified themselves incorrectly depending on what gear they were installed in. After a very difficult conversation with HiFibers support group, what I received wasnt what I ordered. The ones I received had a specific identification for a manufacturer, so other devices read them wrong. I purchased 2 modules, same model but not vendor-coded, from another brand and they worked fine. Too late to return these. Update: HiFiber contacted me and we discussed the issue, ultimately firmware related on the modules for the device I was using it in and they had addressed it. They exchanged the modules, with my only cost being the return shipping. I highly recommend HiFiber because they will make it right if there is an issue.

  • Tara Schaefer

    > 24 hour

    Works great in my cisco 3750 switch.

  • A. Pounders Jr.

    > 24 hour

    These work great with Unifi switches and Intel Nics. Will buy again.

10GBase-T10GBase-T
1g sfp rj451g sfp rj45
premium materialspremium materials

The 10G-SFP-T copper transceiver module is a high performance integrated duplex data link for bi-directional communication over copper cable. It is specifically designed for high speed communication links that require 10 Gigabit Ethernet over Cat 6a/7 cable. This is the first SFP+ transceiver that offers 10 Gb/s communication over this type of media.

Features:

• Supports Links up to 30m using Cat 6a/7 Cable

• SFF-8431 and SFF-8432 MSA Compliant

• IEEE 802.3az Compliant

• Low Power Consumption (2.5W MAX @ 30m)

• Fast Retrain EMI Cancellation Algorithm

• Low EMI Emissions

• I2C 2-Wire Interface for Serial ID and PHY Register Access

• Auto-negotiates with other 10GBase-T PHYs

• MDI/MDIX Crossover

• Multiple Loopback Modes for Testing and Troubleshooting

• Built-in Cable Monitoring and Link: Cable Length Measurements; Opens/Shorts

• Robust Die Cast Housing

• Bail Latch Style ejector mechanism

• Unshielded and Shielded cable support

Related products

Shop
( 1634 reviews )
Top Selling Products