













2Pcs Heavy Duty Automatic Center Punch, 5 Premium Steel Spring Loaded Center Hole Punch, Adjustable Spring Impact Center Marker Scriber Tool for Metel, Plastics, Wood, Glass by karmiero
-
Floyd
> 3 dayLove it
-
MilkinDT
> 3 dayCant beat the price, good quality
-
RFGuy
> 3 dayThis is a nice punch. Would have given 5 stars, but the first time I used it, the punch did not reload. I took the unit apart but found nothing I could see holding the spring. I banged it on the table and the spring released. After reassembling the punch worked perfectly and reset every-time.
-
Rob
> 3 dayCant say enough good things about this set of spring loaded punches. They work perfectly and like they are supposed to. The knurling provides a nice grip. Both sides can be unscrewed for cleaning and lubrication. You really cannot go wrong with this set. They are an excellent value. I have a Starrett at work that cost ten times as much as these two. They make the same indent on steel as the Starrett does. They even feel the same when used. I would highly recommend these center punches. Extremely useful tool to have on hand.
-
Luis M. Martinez
> 3 dayThe mechanism in both United are very difficult to work. Need to repeatedly press the unit down more than once to have the spring disengage and spring back to make the mark. Is is easier to just use a scribe instead of the center points that I purchased. Not happy with the product unfortunately. Thank you.
-
Emilio
> 3 dayIF yours doesnt punch holes, you have to open up the front part and change the direction of the spring. The spring that is closest to the hole punch part. For some reason the spring I received way put it backwards so it was catching on the mechanism inside and not pressing into the whole fully.
-
Ask Ari Anything
> 3 dayEasily adjustable striker. Works perfectly. Built well.
-
SteveV
> 3 dayThis is a usable and functional low budget center punch. The product listing indicates it’s made of “high-quality stainless steel” but it appears to be run of the mill steel. I saw no difference when I adjusted the spring tension and used the punch on 1/8” thick mild steel and the resulting dimple wasn’t very deep at any spring tension. That said, it’s usable and there’s admittedly little to complain about given the $6 price for 2 punches.
-
Jay D.
> 3 dayIve used other center punches; all have misfired at some point or have left little marks that were hard to start drilling in. These punches leave a really deep mark and so far, no misfires... & have a really nice price tag as well. Thanks.
-
Luis M. Martinez
> 3 dayThe mechanism in both United are very difficult to work. Need to repeatedly press the unit down more than once to have the spring disengage and spring back to make the mark. Is is easier to just use a scribe instead of the center points that I purchased. Not happy with the product unfortunately. Thank you.