4 Pack 12x1.5x0.12 1095 Steel Flat Stock with Strict Quality Standards, The Perfect Knife Making Steel for Professional & Hobbyist Use, Annealed High Carbon Steel for DIY Knife Making - by TITGGI…
-
builditall
> 3 dayHarder to cut that most but its worth it once you build something out of it.
-
Bill Reinicke
04-06-2025To be honest I was skeptical. I thought for the price I couldnt go wrong. With the ability to return it if I didnt like it I decided to pull the trigger and bought 5 1.5x.12 bars. They were packaged just like described. The bars were exact, flat, and straight. I did a spark test and it was no doubt high carbon steel. Its made in China, but so is everything else. I turned those bullets into knife blanks. It took some work to surface grind the blanks to true them up, but not bad. Im looking forward to beveling and finishing these knives. I will be buying more of this steel.
-
whitney
> 3 dayWorked out great..reccomend
-
Ego
> 3 dayThis is advertised as a 4 pack but only had 2 in the package.
-
Kindle Customer
Greater than one weekIncorrect description. The bars i received were not annealed so could not be cut until that was done.
-
Keely Smitham
> 3 dayMy son loved Ed this as a Christmas gift.
-
Prof. Eva Lockman
> 3 dayNot annealed. File skates and can’t cut it. Pretty much worthless to me.
-
ERNEST T. TIRERBITER
> 3 dayNice study metal
-
Kirby
Greater than one weekMade a Damascus billet with this 1095 and 15n20 and the 1095 did not etch, pretty sure i didnt get 1095 steel, wasted a lot of my time to not get the results i should have gotten
-
Chuck
> 3 dayVery lightweight I was surprised I great item for making knives
TITGGI is committed to providing customers with excellent products and the best service. If you are not satisfied with the product, we will provide you with a satisfactory solution.
Why Choose 1095?
The 1095 steel flat stock is the most common and one of the most widely used high carbon steel on the market. For knives, 1095 Steel is a very "standard" steel with good performance and low cost, with appropriate toughness and sharpness, better in every way than 1084 steel for knife making. 1095 steel flat stock is an awesome knife making supplies.
Anti-rust Packaging:
- We apply anti-rust oil on the steel plate to prevent the 1095 steel flat stock plate from rusting.
- We use anti-rust paper to seal the 1095 steel bar stock plate to isolate the knife steel plate from contacting with outside air or water.
- Finally, we put the knife making steel plate into the bubble bag to isolate the air and water again, and prevent the sharp four corners from damaging other products delivered together.
Maintenance Points:
- Remember to wash it, wipe it clean, and dry it after your knife steel contacts with water, blood and other liquids or in a humid environment, make sure its dry and there is no moisture on the blade.
- Remember to apply knife oil when the knife is not used for a long time.
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| 3 Pack 1095 Steel Flat Stock | 4 Pack 1095 Steel Flat Stock | 4 Pack 1095 Steel Flat Stock | 5 Pack 1095 Steel Flat Stock | 5 Pack 1095 Steel Flat Stock | 8 Pack 1095 Steel Flat Stock | |
| Available on Amazon | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
| Quantity | 3 | 4 | 4 | 5 | 5 | 8 |
| Length | 12 Inches | 12 Inches | 12 Inches | 12 Inches | 12 Inches | 12 Inches |
| Width | 1.5 Inches | 1.5 Inches | 1.5 Inches | 1.5 Inches | 2 Inches | 1.5 Inches |
| Thickness | 0.16 Inches | 0.16 Inches | 0.12 Inches | 0.12 Inches | 0.12 Inches | 0.12 Inches |