4 Pack 12x1.5x0.12 1095 Steel Flat Stock with Strict Quality Standards, The Perfect Knife Making Steel for Professional & Hobbyist Use, Annealed High Carbon Steel for DIY Knife Making - by TITGGI…
-
Craig west
> 3 dayAs advertised
-
Kindle Customer
> 3 dayIncorrect description. The bars i received were not annealed so could not be cut until that was done.
-
Ego
> 3 dayThis is advertised as a 4 pack but only had 2 in the package.
-
claudia p.
> 3 dayShipping and handling was fast. Metal was great and cut true to its length. Which is important when making knives.
-
Forrest W.
> 3 daySteel arrived today. Dimensions are right and it looks good but every single piece has a noticeable bow to it. I might be able to straighten them out but its very disappointing especially given the item description of strict quality standards.
-
Dan
> 3 dayPrice has gone up $10.00 in the lat week.Not as good of a deal as it was when it was only $20.99. You can get steel from stateside for the $30 they are asking for now.. Came in a nice package. All of the pieces were flat and did not have any rust on them. They did have 1 or 2 very small marks on them. Almost unnoticeable. Package says right on it Made in China, which I knew before purchasing. The very edge of the metal is hard, my files would not bite. But after cutting and taking to the grinder, I had no issues. Theres really no way to tell if this is really 1095 without sending it out to be tested, but I will say it hardend without any issue. After harding I broke a piece to look at and the grain structure looked pretty good. I bought this to strengthen my knife making skills and for this it works. When I feel my skills are better I may look for higher end steel, but for now Im fairly impressed with this stuff and will continue to use it as long as quality stays the same. Hope this helps.
-
Karen Armstrong
> 3 daySeems okay but not annealed. If so, not correctly. Having to anneal mine. Thats why I gave it a 4. Takes time and money.
-
Priem1206
> 3 dayThis product was packaged very professionally. High quality steel no scratches no marks no dents very happy with product. I will purchase again.
-
ERNEST T. TIRERBITER
> 3 dayNice study metal
-
Rick Benke
Greater than one weekI havent started production yet, but I have opened one of the individually wrapped flat bars. It looks great, no dings or sign of rust. Looking forward to the knife build.
TITGGI is committed to providing customers with excellent products and the best service. If you are not satisfied with the product, we will provide you with a satisfactory solution.
Why Choose 1095?
The 1095 steel flat stock is the most common and one of the most widely used high carbon steel on the market. For knives, 1095 Steel is a very "standard" steel with good performance and low cost, with appropriate toughness and sharpness, better in every way than 1084 steel for knife making. 1095 steel flat stock is an awesome knife making supplies.
Anti-rust Packaging:
- We apply anti-rust oil on the steel plate to prevent the 1095 steel flat stock plate from rusting.
- We use anti-rust paper to seal the 1095 steel bar stock plate to isolate the knife steel plate from contacting with outside air or water.
- Finally, we put the knife making steel plate into the bubble bag to isolate the air and water again, and prevent the sharp four corners from damaging other products delivered together.
Maintenance Points:
- Remember to wash it, wipe it clean, and dry it after your knife steel contacts with water, blood and other liquids or in a humid environment, make sure its dry and there is no moisture on the blade.
- Remember to apply knife oil when the knife is not used for a long time.
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| 3 Pack 1095 Steel Flat Stock | 4 Pack 1095 Steel Flat Stock | 4 Pack 1095 Steel Flat Stock | 5 Pack 1095 Steel Flat Stock | 5 Pack 1095 Steel Flat Stock | 8 Pack 1095 Steel Flat Stock | |
| Available on Amazon | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
| Quantity | 3 | 4 | 4 | 5 | 5 | 8 |
| Length | 12 Inches | 12 Inches | 12 Inches | 12 Inches | 12 Inches | 12 Inches |
| Width | 1.5 Inches | 1.5 Inches | 1.5 Inches | 1.5 Inches | 2 Inches | 1.5 Inches |
| Thickness | 0.16 Inches | 0.16 Inches | 0.12 Inches | 0.12 Inches | 0.12 Inches | 0.12 Inches |