6 Cup Brush, Nylon Filament, 5/8-11 Thread, 2500 max.RPM

USED THIS TO CLEAN A SHOWER BASIN IN A CONDO PURCHASE. WAS VERY STAINED AND USED MILD ABRASIVE CLEANER WITH THE BRUSH ATTACHED TO A BATTERY DEWALT ANGLE GRINDER. RUNS A LITTLE SLOWER THAN A CORDED GRINDER WHICH IS WHAT I WANTED. TOOK LESS THAN 5 MINUTES TO HAVE IT POLISHED TO ORIGINAL.

This is a good product for scuffing up or sanding. you have to spin it at its recommended speed or slower or it melts away quickly and will transfer the plastic to the surface. its a very aggressive and hard to control sanding action, any highspots were stripped off quickly. it has a lot of torque as it flattens out to 8 inches when you spin it. You dont want it to be flat. The slower it turns the better it sands. The brush fits into the corners and curves well and you bear down on a little to fit into dents. Use safety gear / a good dust mask and sand outside - it makes dust. Used yard blower to remove most of dust. I used a Harbor Freight $20 angle grinder which is not the correct tool and toggled the power switch to spin slowly. This put stress on HF angle grinder and and it was OOC after doing the bed scuff and 6 dents that needed to be done . I accomplished stuffing the pickup bed truck in about 1 hr. Using the wrong power tool to run it It was well worth it. Still have 3/4 of brush left. I was prepping bed for DIY $100 herculiner coating; due to unseasonable exceptionally freezing cold weather= I could not keep my garage at a stable temperature. Bed was sprayed with base Line-X. My friend is happy because were doing his truck with free DIY coating and hell supply refreshing drinks.

EXCELLENT 100%

Ive used these before. they are far better than a typical wire wheel.

Worked great

Item as described.

hesitation on acceleration between gears disappeared! very good, product, good performance. priced great too!

One nylon cup will last roughly 2500-3000 sq ft at 2100 rpm on a log home sanding. Very pleased and will continue to buy these cups for next season. I want to try these cups on solid stain decks as well, seen very good outcomes with these brushes, glad I took a risk and bought 3, I wish I bought 5. I use on makita polisher for sanding. 11/10 product.

works great-takes larger grinder to move it right

Used to scuff up a pickup bed before applying bed liner. Worked awesome and saved tons of time.