AMP Research BedStep | 75306-01A | Fits 2011 - 2019 RAM 1500; 2011 - 2018 RAM 2500/3500; 2019 - 2022 RAM 1500 Classic (Excludes Dual Exhaust & EcoDiesel Models) and other RAMs (Check Description)

Bought this because I tired of having to use my tire or a step stool to climb into my 2017 RAM 2500 pickup bed. This makes it exponentially easier. Worth the money, tucks away neatly and is fully usable when the tailgate is down (unlike a hitch step). Three of my friends liked my AMP BedStep so much - they bought one for their truck.

Product was not a direct fit to my truck. Factory Class V hitch mounting bracket larger, required some removel of material on Bed step mounting bracket. Also if doesnt clear bottom of bumper because of cross path and blind spot detection system mounted on bottom of bumper, this will be the same for Ram 2500 with same high end system. Had to make a larger spacer and buy longer bolts to properly clear, but this also lowered step almost 2 inches. Then they lower price $20 3 days after my purchase.

The install was fairly easy, however the hardware to mount it to the truck was missing and I had to reuse the old bolts. Which meant I had to cut off the washers off of it and get new ones. I also didnt like the fact that I had to remove the bracket for the bumper corner brace. It seems like they would have a modified bracket in the kit. Time will tell how well I like it.

Very expensive but since my 2011 Ram 2500 Cummins sits up so high, this is a product I definitely couldnt do without. The pad itself is very large, actually bigger than it appears in the picture and gives you plenty of room for a safe climb up into the bed.

shipping was quick, product arrived on time, installation was simple. with step buy step instructions, make sure you have a 3/16 the allen wrench or socket, I only had metric so had to purchase one to complete installation. Also you will need a torque wrench to insure adequate bolt tightness or not stripping out your bumper threads. A 10mm ratcheting wrench helps also for removing triangular bumper stiffener prior to install. Very simple strait forward install, should take no more than 15 or 20 minutes if you have the correct tools.

So much easier to climb in and out of the truck with this step installed. Just a simple kick and it goes back to the retracted position. Worth every penny.

Love it, I’m a short person so any help I’m getting in and out of the bed of my truck is gladly appreciate. Do they make one for the right side of the bumper.

So I have been using this step daily for a few months now and I am completely satisfied with it. I am 210 pounds, use it 10-20 times a day & so far i haven’t had a single issue. It only took about 15 minutes to install, raises & lowers easily. It also tucks out of the way nicely. Seems a little pricey but so far it’s been worth it.

I didnt realize how much I would come to appreciate this thing. I use it all the time to get in and out of the bed. There really isnt a way in and out when the tailgate is down. I have a 2018 RAM 2500 diesel. Fit perfectly. It was straightforward to install; however, you do have to have a torque wrench. My one complaint suggestion is that there are three small allen bolts that hold the step onto the rest of the hardware. Their torque setting is way below the torque range of the other bolts. So really cant use a single torque wrench. Also, couldnt use bicycle torque wrench which is all in metric. Anyway, I overtightened one of the bolts and stripped it. The company quickly sent me replacement. Would be much better if they could tighten into a more solid material so torque setting could be done with same torque wrench as the other bolts.

Great assist and product. The hardest part was removing the stock Y bracket! Easy to install and use.