AMP Research BedStep | 75306-01A | Fits 2011 - 2019 RAM 1500; 2011 - 2018 RAM 2500/3500; 2019 - 2022 RAM 1500 Classic (Excludes Dual Exhaust & EcoDiesel Models) and other RAMs (Check Description)

Just wanted to say this step is awesome and is a huge help getting in my 2016 Ram 3500 Dually. Easy up, easy down. Also, it comes with a thin spacer that says may be required, but for my application, it wasnt necessary. Very simple install also. When the step is up, it is nice and close to the bumper with about an inch of clearance. It follows the lines of the bumper perfect. Strongly recommend.

Super sturdy and easy to use

I know people will say that I just have to follow the directions and it will work fine. The female threads WILL STRIP if you over torque it. I made this mistake...BUT!...I fixed it which works way better anyway. I was able to cut away some metal accessing the ends of the bolts. I then put nylon lock nuts on the bolts. (It is impossible to fit a wrench or socket on the bolt but they are so close to the each other you can put a screwdriver in between to keep it stationary while you tighten the bolt head. Other than that....very awesome step..very durable. Oh...and the piece that you have to remove from the bumper (I had a 2500 RAM) didnt really seem to be needed anyway.

This step is awesome. I have a 2015 Dodge dually with a 4 lift and 37 tall tires, so this was a must have. Even though Im disabled, I can still get in and out of the bed with zero problems. I have the Amp electric running boards as well, and love them both. This has worked so well that Im going to purchase the bed steps next. They are expensive but, IMHO they are priceless. Do yourself a favor and take 5 minutes and install this step. You wont regret it.

This step is simply awesome! I use it daily to climb into the truck bed while working. Easy to install, took about 45 minutes not rushing, and seems very solid. I installed it on my 2018 Ram 1500 the day after I bought it.

I purchased this for my son as a Christmas gift. My son installed it on his 2018 Dodge truck and he loves it! Very sturdy and worthwhile!

First the good... Installed on a 2108 Ram 2500 with Cummins diesel. Install was easy. 20 - 30 minutes. The step folds down easy and definitely makes getting in the bed of my truck much easier. It folds up nicely under the bumper when not being used. The folding brace itself seems sturdy enough. Now for the questionable... The step that attaches to the folding brace is plastic and the bolts to attach the step to the folding brace are pretty small. Not sure how long the plastic step will last before I have to drill my own holes and re-install with sturdier bolts. Time will tell. I gave it 5 stars at this point. If I have an issue with the plastic step not lasting, Ill update this review.

Well made product. Easy installation with decent install directions. Fit perfectly on my 2016 RAM 3500HD w/6.4L Hemi, Crew Cab with 6.5 bed. This is a must have for these big trucks. Im so happy with it that I just purchased AMPs bedstep for the side as well. Plan on installing that on the drivers side for ease of 5th wheel hitch access.

shipping was quick, product arrived on time, installation was simple. with step buy step instructions, make sure you have a 3/16 the allen wrench or socket, I only had metric so had to purchase one to complete installation. Also you will need a torque wrench to insure adequate bolt tightness or not stripping out your bumper threads. A 10mm ratcheting wrench helps also for removing triangular bumper stiffener prior to install. Very simple strait forward install, should take no more than 15 or 20 minutes if you have the correct tools.

Ok. I would have givin this 5 stars all the way except for one important issue. People at AMP if you happen to read this. PLEASE improve the plastic step mounting screws. These screws come with a flat metal threaded insert and are only to be tightened to 6 foot pounds. If you over tighten even the slightest amount, they will strip. Now working on engines and everything else, I could see the problem before it even occured. I didnt even make it to snug and stripped two. No joke... Not even snug.... No big deal though and I didnt care. I went to my bin of nuts and bolts, drilled the plastic step mounting holes all the way through and used my own. Sorry.... but I really wasent willing to trust my girth standing on a step with three screws mounted to flat threaded metal, and tightened to only 6 foot pounds. The nuts and screws I replaced these with look fine, and are tightened to about 20 or so foot pounds. I have a lot more confidence now using the step knowing there is a solid mounting point for the actual step. AMP.... Please fix the design flaw and beef up the mounting area. As seen before, I wasent the only person with strip issues. And hardly even making it to a snugging point before stripping? Yea..... Kind of bummed me out, but I fixed it and its better now then designed. 4 stars. Other then that? I love it and wouldnt be without one. Just watch it people when you got to mount the plastic step on the bracket.