ANYCUBIC 3D Printer Resin with Low Odor and Safety, 405nm UV Plant-Based Rapid Resin with High Precision and Quick Curing for LCD 3D Printing (Grey, 1000g)

With the right cleaning and cure its great.

Prints very well, nice and sturdy stuff with low (6s) exposure times. The smell is probably not as subtle as everyone would like, but it cleans up VERY easily and gives me no headaches.

I was attempting to make the Tesseract cube from the Avengers movie and I figured this would be the right stuff. With the exception of print failures I didnt really have any issue with the resin itself....until I let it cure in the sun. Nowhere in the description or item details does it tell you that it should not be left in the sun to cure like most resins. It turned a dingy yellow in a matter of an hr or so. Needless to say I have waisted days on this project now thanks to a lack of complete information. I cant complete tear down the product as it is relatively translucent and has a very low oder that makes it very tolerable to be in the same room while in use. ***Customer was very quick with response about issues and even sent out new product due to my loss on the projects. As stated, its a good product and besides the yellowing printed very well with minimal odor.***

An amazing printing resin, make sure you prime the models after to reveal all the detail!

UPDATE: This resin is fantastic for printing miniatures BUT it took me way longer than it should have to get the setting just right to make it work, I wouldnt recommend to someone who is new to printing. Attached pictures are the settings I used to make it work but I could only get it to work when using a PFTE lubricant on the FEP. I used 3 in 1 PTFE lubricant https://www.amazon.com/3-ONE-Multi-Purpose-PTFE-Lubricant/dp/B084VPM421 (Cheaper at Lowes) The smell isnt too bad while printing but when its dunked in alcohol it is very bad in my opinion, my whole house smells like this stuff if I dont ventilate my print room. ORIGINAL REVIEW: Hard pass for me on this one. The smell was really bad, it may be a lower odor? but its different from other UV resin smells. It may be OK for others but this specific smell really got to me, to the point that I have a hard time post processing this stuff... The second issue I have is that it took me three attempts to get the prints to actually stick to the build plate, I followed all the recommended settings and had to tweak them a lot to get it to work which is an issue Ive never had before. Bummed out because the price of this stuff is awesome and so are the reviews but between the smell and print difficulty maybe I just got a bad batch but this stuff isnt for me.

Might have been a good resin however the bottle I received was old. Did not print well at all.

I cannot recommend this resin. Four out of my six prints with this resin failed. With the regular resin six out of six were successful. This resin smells way better and I like that it is less harmful, but if I cannot rely on it to print then what is the point?

This is the worst resin I have ever used. I have gone through 3/4 of the 1kg bottle that I have bought, and dont even want to think of the other bottle I have not used. I have change all of my settings, replaced the FEP and even re -leveled the build plate. Cleaned the vat. I will never use or recommend this product to any one. I would rather put up with the smell and get good clean prints consistently.

I gladly pay 50% more to reduce the smell of the resin. I am printing again for the first time in months.

cleanes up easier, cures fine, great detail, seems to stink just as bad as the rest. I am building an activated charcoal filter system to take care of it.