

























ANYCUBIC 3D Printer Resin with Low Odor and Safety, 405nm UV Plant-Based Rapid Resin with High Precision and Quick Curing for LCD 3D Printing (Grey, 1000g)
-
Stephen Feather
08-06-2025Normally I buy a bit more expensive and use-specific resins (heat, flexibility, strength) Hadn’t tried this new “low oder” resin yet so threw it into a cart. “Low” is pretty subjective. For me, it is not as obnoxious as many of the other resins. I still wear a respirator when the machines cover is off and when cleaning up machine and tools. Headaches, watery eyes, etc still occur. Using IPA 90+ for washing, nearly all the residue is removed. Prints left on the plate over night have come out fine. Resin left in vat for 48 hours still binds well. Halot One Plus settings: Bottom time: 25s Bottom layers: 6 (I have some very thin models that warp right off the plate if not set strong early, adjust as needed) Exposure time: 2.5s (3s if you are new or if you have a lot of hours on your lcd) Lift speed: 2mm/s Light delay: 1s Lift height: 6 (5 works with a filled vat, 6 is safer if running towards running the vat out to ensure the resin flows back in time)
-
T. Stephen
Greater than one weekThis stuff really has almost no smell at all. Every brand of resin I have tried before (including Anycubic) has had a terrible smell from the moment I pour it in. This stuff almost has a sweet, natural smell to it. It prints really well too. Because it is opaque, it needs somewhat longer curing. I rinse and cure it just like any other resin, but without the headache.
-
aaron
> 3 dayVery brittle, I wouldnt recommend this one.
-
GramiTami
> 3 dayTrying my hand at 3D printing my own drawings. I started simple, but loved this Eco resin! Not so stinky and the prints came out consistently perfect!
-
Classick Morales.
13-06-2025With the right cleaning and cure its great.
-
David Mortensen
> 3 dayI did a ton of research (about 30 hours) on resin printers and different types of resin as printing material before deciding to buy a resin printer. The elegoo mars 2 pro printer is amazing and I recommend it as a first printer. This resin is spectacular! No bad smells before, during or after printing. No toxic fumes do to it being plant based but also prints the same quality if not a little better than the regular resin. Absolutely a must have if you dont have a dedicated space with adequate ventilation. Supports are easy to remove, I was easily able to remove them from the fingers of the vampire.
-
Melissa Palzewicz
> 3 dayThought Id try out Anycubics low odor resin. I was surprised by how little odor there was. I printed some hummingbird earrings, and they turned out great!
-
Joe C
> 3 dayA lil expensive but worth it
-
Steven Kenniff
09-06-2025The level of print quality on the Eco Resin Grey is out of this world. Only downside is that it is a little bit more brittle than other resin. You can’t beat the Amazon deals on the 1kg bottles. As long as you aren’t printing thin tiny pieces you shouldn’t have to worry about breakage.
-
Kindle Customer
> 3 dayMight have been a good resin however the bottle I received was old. Did not print well at all.