

























ANYCUBIC 3D Printer Resin with Low Odor and Safety, 405nm UV Plant-Based Rapid Resin with High Precision and Quick Curing for LCD 3D Printing (Grey, 1000g)
-
Martin C.
> 3 dayTried 4 different settings. Only got 1 try to print with partial success. Not worth the effort to fine tune the settings to get resin to work.
-
D_Ray
> 3 dayTo be clear, I didnt do a lot of printing with this product. I had a specific need that it did fulfill (see photos). That said, I printed other items at the same time and was less than excited about the results. After curing the color faded, and they were brittle. That could have been because of over-curing but it was only 4 minutes.
-
Stuart
> 3 dayGot it on a really good deal. It is in a saturn 8k and preforms like it should. I had some tempature fluxuation during a print and it didnt seem to mind at all.
-
KittehKat
> 3 dayThe only thing I dislike is the inconvenience of the white part of the seal. It is hard to remove all the fibers so they don’t get into the pour and ruin the screens
-
Noah
> 3 dayThis is a terrific resin to use. There was no smell, and the print time was relatively fast compared to another brand I’ve tried. The uncured model has some flex, which made support removal very easy. The resin is very easy to shake and pour, and had very little bubbles in it when I filled the vat. I will definitely add this to my list of favorite resins to use.
-
Philip Levine
> 3 dayWhile Id really like more information on just how safe this stuff is, its a great resin. It barely smells at all, which is a plus, but Im not sure Id stop wearing a respirator when using it and they recommend still using one on their site. Definitely still wear gloves! The Translucent Green is quite dark on thicker models but looks great. Polishes extremely well, maybe even better than my normal Elegoo Mars Water Washable Resin. Doesnt require a lot of cleanup and didnt even filter much resin into the alcohol in my ultrasonic cleaner. There is also an eSun bio resin that might be worth a try but I couldnt find any real safety information to back up their claims as their info on their site in general was pretty minimal. This is now the only kind of resin Ill be buying for my business for a while. Hoping for more transparent colors and a water washable variant if possible to produce the lowest waste. Im hoping that it really is low VOC and biodegradable like it claims. If this can keep even a small amount plastic out of landfills and oceans its more than worth it and using anything else becomes irresponsible.
-
Emily D
> 3 dayjust what i needed
-
Wyvern
> 3 dayNot great for larger prints, the resin is very thick and goopy, forcing slower printing, I can get unbelievable detail with small prints, but due to its heavy, syrupy nature, larger prints tend to loose definition and warp as resin does not drain as it prints causing it to become too heavy. Nice blue-grey color, low odor and a fast curing time (2.1s). Would be 5 stars if they thinned out the mixture.
-
Aprizzle and K-Dizzle
Greater than one weekUPDATE: This resin is fantastic for printing miniatures BUT it took me way longer than it should have to get the setting just right to make it work, I wouldnt recommend to someone who is new to printing. Attached pictures are the settings I used to make it work but I could only get it to work when using a PFTE lubricant on the FEP. I used 3 in 1 PTFE lubricant https://www.amazon.com/3-ONE-Multi-Purpose-PTFE-Lubricant/dp/B084VPM421 (Cheaper at Lowes) The smell isnt too bad while printing but when its dunked in alcohol it is very bad in my opinion, my whole house smells like this stuff if I dont ventilate my print room. ORIGINAL REVIEW: Hard pass for me on this one. The smell was really bad, it may be a lower odor? but its different from other UV resin smells. It may be OK for others but this specific smell really got to me, to the point that I have a hard time post processing this stuff... The second issue I have is that it took me three attempts to get the prints to actually stick to the build plate, I followed all the recommended settings and had to tweak them a lot to get it to work which is an issue Ive never had before. Bummed out because the price of this stuff is awesome and so are the reviews but between the smell and print difficulty maybe I just got a bad batch but this stuff isnt for me.
-
Steven J. Howland
> 3 dayI recently purchased an Anycubic Photon and I bought this resin to try out first. I loved it so much that I am on my second liter of it now. It has very low odor and is easy to work with. I print wargaming miniatures and this does great showing the detail on the small figures I print. I love that you can clean up the resin with dish soap and you are not required to use iso alcohol. This resin being plant based and having less smell should still be respected like other resins when you are using it. Always wear gloves and avoid skin contact. I have been telling all of my friends that print about this and I will keep buying it. It is really my favorite resin.