I did a ton of research (about 30 hours) on resin printers and different types of resin as printing material before deciding to buy a resin printer. The elegoo mars 2 pro printer is amazing and I recommend it as a first printer. This resin is spectacular! No bad smells before, during or after printing. No toxic fumes do to it being plant based but also prints the same quality if not a little better than the regular resin. Absolutely a must have if you dont have a dedicated space with adequate ventilation. Supports are easy to remove, I was easily able to remove them from the fingers of the vampire.

Thought Id try out Anycubics low odor resin. I was surprised by how little odor there was. I printed some hummingbird earrings, and they turned out great!

Great prints

This is the first resin Ive printed with, so take anything I say with a grain of salt. The have been amazing, especially since I came from FDM (filament) printers. I see lots of detail in my prints, it cures well, and doesnt have a noxious odor. It is more brittle than prints made with an FDM printer, but the prints arent fragile at all, and this isnt an engineering resin anyway.

Very brittle, I wouldnt recommend this one.

Might have been a good resin however the bottle I received was old. Did not print well at all.

The resin is too brittle for tabletop models. It also gave me many print failures even after settings were dialed in perfectly.

This product does not work. I had to switch resin because the anycubic resin won’t work. If you have issues with the print sticking to the platform, then this is the culprit. Don’t buy. Use another brand.

Contains unknown chemicals... Where is your safety sheet? Safety guessing, etc..

Will not stick to build plate, I have tried everything.